96 SS for sale
#1
96 SS for sale
motor:
383 with JE 11.8 pistons,Childs & Albert rods,Scat Crank, everything is balanced, heads have bigger valves,comp cams valve springs,CC306 cam, CSi water pump,Cloyes True Roller timing chain, BBK 58 MM TB,heads and intake have been ported,MSD plug wires.
Exhaust:
Hooker long tubes with true 3in duals and flowmaster mufflers
Tranny:
Yank Pro 4L60E with Yank Pro 3600 convertor, tranny cooler
Suspension
global west torque arm,BMR lowr control arms and pan hard rod Eiback(sp?) pro launch kit
Rearend
Moser 9in with posi unit and 4.11 richmond gears
Wheels
weld drag lites 3 1/2 up front 10s in back with MT et Streets on the back
i have a FULL cage for the car that is not in it yet , it needs to be welded in the car.
the car has full leather interior (not in the car right now pulled to put cage in)
the car runs now, but needs to be finished. still has a few smalls things to put on the car, but dont need much to be ready for the street/track. i have lost interest in the car and am going to sell it all!
i am sure i am leaving some stuff out if i think of anything i will post it here.
if you are interested int he car, E-mail me or call me
(903)780-6754
csa240@cs.com
$9500(there is more than this in parts on this car!!!!!!!)
383 with JE 11.8 pistons,Childs & Albert rods,Scat Crank, everything is balanced, heads have bigger valves,comp cams valve springs,CC306 cam, CSi water pump,Cloyes True Roller timing chain, BBK 58 MM TB,heads and intake have been ported,MSD plug wires.
Exhaust:
Hooker long tubes with true 3in duals and flowmaster mufflers
Tranny:
Yank Pro 4L60E with Yank Pro 3600 convertor, tranny cooler
Suspension
global west torque arm,BMR lowr control arms and pan hard rod Eiback(sp?) pro launch kit
Rearend
Moser 9in with posi unit and 4.11 richmond gears
Wheels
weld drag lites 3 1/2 up front 10s in back with MT et Streets on the back
i have a FULL cage for the car that is not in it yet , it needs to be welded in the car.
the car has full leather interior (not in the car right now pulled to put cage in)
the car runs now, but needs to be finished. still has a few smalls things to put on the car, but dont need much to be ready for the street/track. i have lost interest in the car and am going to sell it all!
i am sure i am leaving some stuff out if i think of anything i will post it here.
if you are interested int he car, E-mail me or call me
(903)780-6754
csa240@cs.com
$9500(there is more than this in parts on this car!!!!!!!)
#9
Thread
Thread Starter
Forum
Replies
Last Post
2QUIK6
Parts For Sale
2
07-15-2015 07:46 PM
NewsBot
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
1
03-13-2015 07:15 AM
NewsBot
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
0
12-03-2014 12:30 PM