I figured this would get more views here being in the v6 section. If a moderator would like to move this to the mall that is fine. A link to the new thread in this thread would be great though to direct people to the new thread

These are gen 1 ported heads for a fiero or other iron head motor.

These have been fully ported and polished.

-gasket matched intake runners
-enlarged intake runners(all casting flaws removed)
-Enlarged and ported bowls
-modified intake vanes. Still exist but cleaned up a bit to cut the air a bit more.
-ported and enlarged exhaust bowls
-ported exhaust ports-casting flaws in ports are removed

These have the works done to them!! I ported them myself. These will outflow stock or mildly ported iron heads with ease.

Sorry but I have no flow data for them. I will post pics shortly but my buddy has my camera so hopefully within a day or so.

I am asking $250 plus shipping for these heads. I am not asking all that much as this is the first set of heads I have ported. I also have a matching ported lower intake plenum for a fiero that matches these heads. If you want the matching ported intake manifold add $100 for a total of $350 plus shipping. This is an introductory price. After this they will probably cost more.

These heads come bare without valves or springs. THey do have the rocker studs but other then that they are bare. They will need to go to a machinist to be cleaned and to have the rest of the normal work done to them.

These would be great for someone doing an engine build right now and are looking for some ported heads or for someone that wants to swap some new heads onto their car to get some power back.

I see about a 15-20 hp increase with these heads and matching lower intake.

I will give you a $25 credit if you send me your old heads as well.

If you aren't satisfied with the heads then just return them for a refund. I don't think their will be a real problem with that though as I am sure you will be happy with them. I would like to put them on my car but need money for otehr projects.

Thanks for looking

http://www.shaun.saturnet.net/pics/F...ed%20head1.JPG

http://www.shaun.saturnet.net/pics/F...20head%202.jpg

 

Those aren't bad at all, if people can't do it them self they sould get your heads.
My ported heads are a little more extream than yours. Not for those with mild engines.
Did you block off the EGR port?
How long did you work on them?
I have pictures of mine on the site in the sig if you want to see some more ported V6 heads.

 

i ported mine my self..allot of work but they seem to flow alright

 

No I didnt' block off that port. It sucks its there but I am not going to go through all the work to close them off.

i dont' know how much time I spent on them. Maybe 15 hours or so? I took my time and didn't go too fast.

I want to sell these as I have other projects going on. How about $225 plus shipping for them now??

If not then its ebay time