Good formula for a stiff suspension?
#1
Good formula for a stiff suspension?
I have been looking around at posts and talked to some people and I think I have narrowed to this. I might do some dragging but I am mainly looking for better feel. If someone could point out a flaw or if its a good setup please let me know! I am thinking that I will end up maybe with a little too much understeer?
SLP STB
V8 takeoffs shocks Decarbons
19mm rear sway bar(V8 takeoff)
32mm (probably 1LE maybe SLP's)but no poly bushings
1LE front spring but V8 takeoff rear springs ( is this a good idea because with the few bolt ons I have now I don't need the stiff one in the back. And that rear 1LE spring is pretty stiff.
SFC's (weld on) not sure on that yet I want a stiffer suspension but not to the point that I can't have a decently smooth ride.
Let me know...thanks
SLP STB
V8 takeoffs shocks Decarbons
19mm rear sway bar(V8 takeoff)
32mm (probably 1LE maybe SLP's)but no poly bushings
1LE front spring but V8 takeoff rear springs ( is this a good idea because with the few bolt ons I have now I don't need the stiff one in the back. And that rear 1LE spring is pretty stiff.
SFC's (weld on) not sure on that yet I want a stiffer suspension but not to the point that I can't have a decently smooth ride.
Let me know...thanks
#4
hmmNo not really the 93-97 came with a 17mm and I think the 98-02's came with 15mm.
some V8 swaybars would help you car out a good bit. Are you thinking about doing some suspension mods as well?
some V8 swaybars would help you car out a good bit. Are you thinking about doing some suspension mods as well?
#6
Originally posted by V6Power
Poly bushings/endlinks are nice. No noise. Do they even have rubber bushings for the 32mm bar? Take the funds from STB and SFC and put it in Bilstein HD fund.
Poly bushings/endlinks are nice. No noise. Do they even have rubber bushings for the 32mm bar? Take the funds from STB and SFC and put it in Bilstein HD fund.
Last edited by blue95; 10-31-2002 at 11:56 AM.
#8
Originally posted by 1fastV6
all you need are sfc and a stb. i wish you could drive my car, so you could feel how nice subframes are. i used to say they were my best mod.
all you need are sfc and a stb. i wish you could drive my car, so you could feel how nice subframes are. i used to say they were my best mod.
#9
suspension mods: now i also have an adj. panhard bar, and lca. but i used to compare my subframes better than my intake and exhaust, cutout, corbeau seats, and lsd. i could REALLY tell a difference when the sfc went on.
#10
Originally posted by 1fastV6
suspension mods: now i also have an adj. panhard bar, and lca. but i used to compare my subframes better than my intake and exhaust, cutout, corbeau seats, and lsd. i could REALLY tell a difference when the sfc went on.
suspension mods: now i also have an adj. panhard bar, and lca. but i used to compare my subframes better than my intake and exhaust, cutout, corbeau seats, and lsd. i could REALLY tell a difference when the sfc went on.
#11
with a new suspension i would trust my money on sfc any day. but seeing how he has a 95 i guess he might want to spend all that money for shocks springs sway bars. but for sfc and install it was only $240 for me.
Thread
Thread Starter
Forum
Replies
Last Post
F'n1996Z28SS
Cars For Sale
8
08-23-2023 11:19 PM
dbusch22
Forced Induction
6
10-31-2016 11:09 AM
Fbodfather
Automotive News / Industry / Future Vehicle Discussion
25
06-21-2002 04:12 PM