MY Z28 VS 06 Grand Prix GXP
So this guy here at work just traded his 04 GTP for a 06 GXP and is talking smack about how he can now take me. This GXP has the LS4 with 303HP and 323Lb-ft torque and A4. I havent had my car to the dyno but should be in the same Hp range with the mods I have. Have any of you had the opportunity to run one of these? We are going to go out on Saturday and see how far in the dust I can leave him
. What are your thoughts on this, will he be a good match for my Z.
F-Body drivers are: SMARTEST ON THE PLANET
____________________________________
Yellow Green 96' z28, M6, Some kind of Cam, 58mm BBK TB with bypass, Pro Mag 1.6RR, Comp’s Hardened pushrods with LT4 Springs, Pacesetter Headers, Flowmaster cat-back/no Cats & 3” pipe, K&N CAI, 160 Stat, Vortech Elbow, March pulleys, LT4 KM, B&M ripper, NGK TR55's, MSD Blaster coil, 4.10’s. BMR STB, Walpro 255, PCMFORLESS tune.
. What are your thoughts on this, will he be a good match for my Z.F-Body drivers are: SMARTEST ON THE PLANET
____________________________________
Yellow Green 96' z28, M6, Some kind of Cam, 58mm BBK TB with bypass, Pro Mag 1.6RR, Comp’s Hardened pushrods with LT4 Springs, Pacesetter Headers, Flowmaster cat-back/no Cats & 3” pipe, K&N CAI, 160 Stat, Vortech Elbow, March pulleys, LT4 KM, B&M ripper, NGK TR55's, MSD Blaster coil, 4.10’s. BMR STB, Walpro 255, PCMFORLESS tune.
Re: MY Z28 VS 06 Grand Prix GXP
I would hope with all the crap listed in your thread you make more than 303 HP...that would be a gain of 18
...unless you mean you have 303 RWHP to his 303 crank...or somekinda cam means stock...I dunno what the new GP weighs but GM cars IMO are progressivly getting fatter...and the tranny in it sucks nuts...if I had a dollar I would bet it on you...
...unless you mean you have 303 RWHP to his 303 crank...or somekinda cam means stock...I dunno what the new GP weighs but GM cars IMO are progressivly getting fatter...and the tranny in it sucks nuts...if I had a dollar I would bet it on you...
Re: MY Z28 VS 06 Grand Prix GXP
Then It should be a cake walk on this guy. I need to do some research on his car so I can explain his weeknesses and save my gas.
I list my cam as "Some kind of Cam" because I got the car from a dealer and the guy that owned the car before me put most of the mods on including the Cam. I know a friend of the previous owner and he said two weeks after he traded the car in, he went IRAQ and hasen't come back. So I don't know what cam is running in my engine.
F-Body drivers are: SMARTEST ON THE PLANET
____________________________________
Yellow Green 96' z28, M6, Some kind of Cam, 58mm BBK TB with bypass, Pro Mag 1.6RR, Comp’s Hardened pushrods with LT4 Springs, Pacesetter Headers, Flowmaster cat-back/no Cats & 3” pipe, K&N CAI, 160 Stat, Vortech Elbow, March pulleys, LT4 KM, B&M ripper, NGK TR55's, MSD Blaster coil, 4.10’s. BMR STB, Walpro 255, PCMFORLESS tune.
I list my cam as "Some kind of Cam" because I got the car from a dealer and the guy that owned the car before me put most of the mods on including the Cam. I know a friend of the previous owner and he said two weeks after he traded the car in, he went IRAQ and hasen't come back. So I don't know what cam is running in my engine.
F-Body drivers are: SMARTEST ON THE PLANET
____________________________________
Yellow Green 96' z28, M6, Some kind of Cam, 58mm BBK TB with bypass, Pro Mag 1.6RR, Comp’s Hardened pushrods with LT4 Springs, Pacesetter Headers, Flowmaster cat-back/no Cats & 3” pipe, K&N CAI, 160 Stat, Vortech Elbow, March pulleys, LT4 KM, B&M ripper, NGK TR55's, MSD Blaster coil, 4.10’s. BMR STB, Walpro 255, PCMFORLESS tune.
Re: MY Z28 VS 06 Grand Prix GXP
Originally Posted by 00blky87fb
i seen a write up on them on a good day they are low to mid 14's
I guess there wasn't much performance enhancement with the V8.
Thread
Thread Starter
Forum
Replies
Last Post
F'n1996Z28SS
Cars For Sale
8
Aug 23, 2023 11:19 PM
dbusch22
LT1 Based Engine Tech
2
Jan 5, 2015 07:14 PM



