Track Kill Stories Race Track Victories, 1/4 Mile Times, Dyno Numbers - DRIVE RESPONSIBLY

me vs briank8811

Thread Tools
 
Search this Thread
 
Old Oct 5, 2004 | 09:56 AM
  #1  
camzaro28's Avatar
Thread Starter
Registered User
 
Joined: Apr 2004
Posts: 1,046
From: Fargo, ND
me vs briank8811

anyway i was gettin oil for my blazer at autozone and we met up there. i wanted to see how my car stood up against his. so we decide to go to a 4 lane highway ( 2 lanes each way). and on the way there he decided to throw a lil rev while we were going about 40 so we punch it and to 70 i pulled the whole time. i was like holy ****. then he got next to me and said" damn stall convertor".so we go to the highway fought traffic for a lil then braked to 50mph, and went to 120ish. the whole time he was slowly pulling and at the time we stopped my front bumper was at his side mirror front door area.
anyway his car is not tuned and he had a girl in the car with him. his car runs pretty good for not being tuned. hope u enjoyed
he has been throwing remarks out in some of my other posts, so i finally put this run in here, ARE YOU HAPPY NOW BRIAN? j/k
Old Oct 5, 2004 | 06:06 PM
  #2  
Antz97ZNJ's Avatar
Registered User
 
Joined: Sep 2000
Posts: 3,223
From: Browns Mills, New Jersey
Re: me vs briank8811

Not bad ya need some headers and some 373's to go w/ that stall to get that trap up
Old Oct 5, 2004 | 10:48 PM
  #3  
Briank8811's Avatar
Registered User
 
Joined: Oct 2003
Posts: 290
From: Orlando, Florida
Re: me vs briank8811

Yea im happy. LOL. My opti finally went soo its back in the shop now. They said it lost like 100 rwhp due to opti only firing 7 cyl at any given rotation. So I guess i was around 260 rwhp when i raced you, but my torque is what gave me a little edge. We will race again once she is running right. Im going to take her out to the track when i can. Ur car runs very strong for a stock motor. I was like when you pulled me down university. Yea my g/f was weighin' that car down bad... . I hope to run you again soon. LAter
Old Oct 6, 2004 | 11:59 PM
  #4  
Steve Y's Avatar
Registered User
 
Joined: May 2001
Posts: 97
From: Reno, NV
Re: me vs briank8811

Originally Posted by Briank8811
Yea my g/f was weighin' that car down bad... .
Better put her on a diet or trade here in for a smaller model.
Old Oct 7, 2004 | 08:19 AM
  #5  
camzaro28's Avatar
Thread Starter
Registered User
 
Joined: Apr 2004
Posts: 1,046
From: Fargo, ND
Re: me vs briank8811

lol she dont need to be any smaller!
Old Oct 7, 2004 | 10:49 AM
  #6  
Briank8811's Avatar
Registered User
 
Joined: Oct 2003
Posts: 290
From: Orlando, Florida
Re: me vs briank8811

Yea shes about 110 lbs. Knocked my times WAY DOWN. LOL. But i have the car in the shop now. Turns out my pcm was actin up soo i replaced it along with my wiring harness and then a new opti.....and it still dosnt start. I think my alarm system is screwing it up now. I want to run u again when its fixed. Later
Old Oct 8, 2004 | 10:01 AM
  #7  
Steve Y's Avatar
Registered User
 
Joined: May 2001
Posts: 97
From: Reno, NV
Re: me vs briank8811

Originally Posted by Briank8811
Yea shes about 110 lbs. Knocked my times WAY DOWN. LOL.
Yeah, about 1 carlength in the 1/4 mile.
Old Oct 8, 2004 | 10:42 AM
  #8  
Briank8811's Avatar
Registered User
 
Joined: Oct 2003
Posts: 290
From: Orlando, Florida
Re: me vs briank8811

Lets just say that i could be running low 11's without her in the car. (LOW 13's car) Major weight. Well im still waitin for my car to run. Later
Old Oct 8, 2004 | 09:46 PM
  #9  
Steve Y's Avatar
Registered User
 
Joined: May 2001
Posts: 97
From: Reno, NV
Re: me vs briank8811

Originally Posted by Briank8811
Lets just say that i could be running low 11's without her in the car. (LOW 13's car) Major weight. Well im still waitin for my car to run. Later
100 lb. loss equals a gain of about .1 in the 1/4 mile, not even close to 2 seconds!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Briank8811
Parts For Sale
9
Sep 29, 2004 01:51 PM
Briank8811
South Atlantic
5
Sep 20, 2004 11:21 PM
Briank8811
Parts For Sale
3
Sep 20, 2004 10:16 AM
Briank8811
Parts Wanted
8
Feb 25, 2004 01:57 AM
Briank8811
Parts Wanted
1
Dec 8, 2003 01:33 AM




All times are GMT -5. The time now is 04:46 AM.