Track Kill Stories Race Track Victories, 1/4 Mile Times, Dyno Numbers - DRIVE RESPONSIBLY

Got beat by Foxbody..

Thread Tools
 
Search this Thread
 
Old Mar 6, 2006 | 10:04 AM
  #1  
99_Z_155's Avatar
Thread Starter
Registered User
 
Joined: Jun 2002
Posts: 411
From: Pueblo, Co USA
Got beat by Foxbody..

We went from a second gear roll at first. he took off without warning and i got raped. the second race we went at the same time from a first gear roll and i pulled ahead. we shut down after he pulled up where my front bumper was at his door. I have beat this car a few times before, but he got new heads and a shot of juice (unknown shot size). He also already had a larger cam and intake and exhaust. My buddy told the guy later, "Not too bad for ALL MOTOR huh?". I thought it was funny. Anyway, thats what went down.
Old Mar 6, 2006 | 11:21 AM
  #2  
trymy6's Avatar
Registered User
 
Joined: Jan 2004
Posts: 66
Re: Got beat by Foxbody..

I've been around a lot of foxbodies, and had an 89gt until I got rear ended. Most heads, cam ,intake 5.0's run high 12's to low 13's at 106-109 mph. I bet he was running no smaller than a 100 shot too. I ran on a couple bolt on Ls1's in mine. It was an AOD car with bolt ons and a 175 shot.
Old Mar 6, 2006 | 12:10 PM
  #3  
Bow94z's Avatar
Registered User
 
Joined: Dec 2002
Posts: 2,365
From: Philly,PA
Re: Got beat by Foxbody..

Yea some of those fox bodies can be killer
Old Mar 6, 2006 | 02:52 PM
  #4  
Bersaglieri's Avatar
Registered User
 
Joined: Sep 2003
Posts: 5,907
From: The Wild West
Re: Got beat by Foxbody..

Originally Posted by bow94z
Yea some of those fox bodies can be killer
Thing is, most arent. I have a buddy who swore up and down his 92 5.0 ran low 13's stock and now that he got a cam runs low 12's. Although he wont ever race me to prove it

-Dustin-
Old Mar 7, 2006 | 03:31 AM
  #5  
The Anti Riced's Avatar
Registered User
 
Joined: Jun 2002
Posts: 59
From: Merritt Island, FL ( Brevard )
Re: Got beat by Foxbody..

So they get to where I am with a cam, intake manifold, and heads, and I just have a moderate size cam in a heavier car. No wonder why everyone throws an S-trim on their fox body.
Old Mar 7, 2006 | 08:52 PM
  #6  
Mike 92LX's Avatar
Registered User
 
Joined: Dec 1969
Posts: 221
From: Merritt Island FL USA
Re: Got beat by Foxbody..

Good job against the Mustang. Be leary of what he thinks he can run
I used to have fun smashing up LS1s/LT1s from this board when I was n/a years ago(12.9 at 111MPH on radials with cast iron heads). Of course times have changed since then.
Old Mar 8, 2006 | 06:24 PM
  #7  
1BadAzzGT's Avatar
Registered User
 
Joined: Jun 2000
Posts: 77
From: Pasadena, Md, USA
Re: Got beat by Foxbody..

I'm sorry sir but we're gonna have to lock this post. No way in hell a Mustang beat you....








j/k. Nice runs!!!!
Old Mar 9, 2006 | 06:19 PM
  #8  
guywithaZ's Avatar
Registered User
 
Joined: Sep 2000
Posts: 432
From: KCMO
Re: Got beat by Foxbody..

Originally Posted by bow94z
Yea some of those fox bodies can be killer
No shiat and the crappy ones sound like the good ones. The mustang rule of thumb is flowmasters, I think it's a conspiracy.
Old Mar 11, 2006 | 03:14 PM
  #9  
99_Z_155's Avatar
Thread Starter
Registered User
 
Joined: Jun 2002
Posts: 411
From: Pueblo, Co USA
Re: Got beat by Foxbody..

Yeah, pushing the juice he just pulls me. on all motor its just reciprocated. i pull him. I ran his buddy in a fox last night with headers and 250 shot. took him out pretty good from a second gear roll. now all i need is about $5k more to spend!!!
Old Mar 14, 2006 | 08:53 AM
  #10  
mhhodges76's Avatar
Registered User
 
Joined: Apr 2004
Posts: 80
Re: Got beat by Foxbody..

You never know what your up againest with those foxbodies. Some are slow, most are heavily modded and fast. Good Kill.
Old Mar 20, 2006 | 07:32 PM
  #11  
99_Z_155's Avatar
Thread Starter
Registered User
 
Joined: Jun 2002
Posts: 411
From: Pueblo, Co USA
Re: Got beat by Foxbody..

I just found out that the first stang was running a 250 SHOT!! Holy crap, im not so sad now. He said has put over 7 bottles through that engine. Engine failure in 3..2...1....
Old Mar 21, 2006 | 05:00 AM
  #12  
mhhodges76's Avatar
Registered User
 
Joined: Apr 2004
Posts: 80
Re: Got beat by Foxbody..

Originally Posted by 99_Z_155
I just found out that the first stang was running a 250 SHOT!! Holy crap, im not so sad now. He said has put over 7 bottles through that engine. Engine failure in 3..2...1....
Maybe he sprayed you the first run and not the second run. That would explain you getting a$$ raped the first race and hanging in the second race.
I'm not sure how built his engine is but a 250 shot of N20 would require a much bigger fuel pump. Many more precautions would have to be taken other than the above mentioned. Then again, why would he lie about the size of the shot? Especially if it makes his car look slower and just a bottle fed pony car.
Old Mar 22, 2006 | 05:38 PM
  #13  
99M6T/A's Avatar
Registered User
 
Joined: Feb 2006
Posts: 15
Re: Got beat by Foxbody..

Yeah where I live Foxes are one of two things pretty much stock and slow or they are sprayed and pretty dang fast. There are a few inbetweens but not many.
Old Mar 23, 2006 | 11:09 AM
  #14  
85_305's Avatar
Banned
 
Joined: Apr 2004
Posts: 1,610
From: Holland, NY
Re: Got beat by Foxbody..

Originally Posted by The Anti Riced
So they get to where I am with a cam, intake manifold, and heads, and I just have a moderate size cam in a heavier car. No wonder why everyone throws an S-trim on their fox body.
Huh.. they also come with 245hp.. imagine that And I guarantee you that a heads/cam/full exhaust 5.0 Fox would stomp the living **** out of your LT1
Old Mar 24, 2006 | 01:54 AM
  #15  
The Anti Riced's Avatar
Registered User
 
Joined: Jun 2002
Posts: 59
From: Merritt Island, FL ( Brevard )
Re: Got beat by Foxbody..

Originally Posted by 85_305
Huh.. they also come with 245hp.. imagine that And I guarantee you that a heads/cam/full exhaust 5.0 Fox would stomp the living **** out of your LT1
Yeah... tell that to my neighbor with the Trick-Flow heads, cam, intake, headers, etc. on his notchback. It's amazing how fast he pulls on me



All times are GMT -5. The time now is 06:27 AM.