I need to know what the stock center to center length of a 4th gen panhard rod is. Some idiot must have jacked up my car by the rod at some point so it needs to be replaced, so I am putting an adjustable one in - I just need to know what to set it at for a baseline. Thanks!

 

I can mesaure my stock one tonight and email you , I just took it off last weekend to put in a UMI part.

 

forget the stock length, use your new adjustable one to center the axle, regardless of stock, thats what it is for.

 

Well, I am taking the car into the alignment shop and they're all worried about side to side specs on the car. I figured it should be dead centered, myself, but I want a baseline just to be sure.

 

I'm pretty sure the stocker is 43-1/16" center-to-center. I'll check when I get home from wor.

 

So i'm not the only one with a stock PHB bar sitting under my bed collecting dust....

 

I just keep tripping over mine in the garage....

Its a close call..... either 43" or 43-1/16"