Steering Wheel Movement..?? Changing Steering Wheel??
Thread Starter
Registered User
Joined: Jan 2006
Posts: 705
From: Waco, Texas
Steering Wheel Movement..?? Changing Steering Wheel??
Well following up my problem here http://www.ls1tech.com/forums/showthread.php?t=501681
"ok when im in my 04 elantra or dads truck/vette I pull on the steering wheel and it stays in place but I get in my 94 formy and I can move it ever so slightly like tilt alittle bit but its locked (im not pushing the movement thing) "
I have checked the column it isnt moving its just moving at the tilt joint like it isnt fully locking??
Im acquiring a 96 formula body later this week with full interior.. was going to change the wheels out maybe fix this problem??? how do I go about doing this??
"ok when im in my 04 elantra or dads truck/vette I pull on the steering wheel and it stays in place but I get in my 94 formy and I can move it ever so slightly like tilt alittle bit but its locked (im not pushing the movement thing) "
I have checked the column it isnt moving its just moving at the tilt joint like it isnt fully locking??
Im acquiring a 96 formula body later this week with full interior.. was going to change the wheels out maybe fix this problem??? how do I go about doing this??
Registered User
Joined: Oct 2004
Posts: 536
From: Little Rock, AR
Re: Steering Wheel Movement..?? Changing Steering Wheel??
There are four bolts inside the column that get loose. This link is about a truck column but the fix is the same.
http://experts.about.com/q/Steering-...uck-w-tilt.htm
http://experts.about.com/q/Steering-...uck-w-tilt.htm
Thread Starter
Registered User
Joined: Jan 2006
Posts: 705
From: Waco, Texas
Re: Steering Wheel Movement..?? Changing Steering Wheel??
Originally Posted by rngilliland
There are four bolts inside the column that get loose. This link is about a truck column but the fix is the same.
http://experts.about.com/q/Steering-...uck-w-tilt.htm
http://experts.about.com/q/Steering-...uck-w-tilt.htm
so my steering column is ****ed? I swear its just the wheel being lose at the tilt thing it doesnt move all the way day
Registered User
Joined: Oct 2004
Posts: 536
From: Little Rock, AR
Re: Steering Wheel Movement..?? Changing Steering Wheel??
The bolts are right behind the tilt joint. You may have some other problem but the symptoms you describe are what happens when the bolts get loose.
Thread Starter
Registered User
Joined: Jan 2006
Posts: 705
From: Waco, Texas
Re: Steering Wheel Movement..?? Changing Steering Wheel??
Originally Posted by rngilliland
The bolts are right behind the tilt joint. You may have some other problem but the symptoms you describe are what happens when the bolts get loose.
it turns just fine and is lined up right but its just lose at the tilt... my elantra on other hand i bent the steering column doing a big jumpwith the wheel turned (dukes of hazard **** oneday)
Thread Starter
Registered User
Joined: Jan 2006
Posts: 705
From: Waco, Texas
Re: Steering Wheel Movement..?? Changing Steering Wheel??
Originally Posted by rngilliland
The bolts are right behind the tilt joint. You may have some other problem but the symptoms you describe are what happens when the bolts get loose.
it turns just fine and is lined up right but its just lose at the tilt... my elantra on other hand i bent the steering column doing a big jumpwith the wheel turned (dukes of hazard **** oneday) its fixed now though
Registered User
Joined: Oct 2004
Posts: 536
From: Little Rock, AR
Re: Steering Wheel Movement..?? Changing Steering Wheel??
If it's the bolts all you have to do is tighten them. The only difference from that guide is you have an airbag. It would be best to use a manual so you don't mess up the airbag if you do it yourself. You will need the lock plate tool and the pivot pin removal tool. I have seen both at autoparts places. I'm sure any repair shop could also fix it. It is a very common problem.
Thread Starter
Registered User
Joined: Jan 2006
Posts: 705
From: Waco, Texas
Re: Steering Wheel Movement..?? Changing Steering Wheel??
Originally Posted by rngilliland
If it's the bolts all you have to do is tighten them. The only difference from that guide is you have an airbag. It would be best to use a manual so you don't mess up the airbag if you do it yourself. You will need the lock plate tool and the pivot pin removal tool. I have seen both at autoparts places. I'm sure any repair shop could also fix it. It is a very common problem.
Thread
Thread Starter
Forum
Replies
Last Post
ro2207
LT1 Based Engine Tech
14
Dec 4, 2014 06:18 PM
JoshGuitar
Drag Racing Technique
4
Jul 23, 2002 06:20 PM
