steering rack: LT1 > LS1
Thread Starter
Registered User
Joined: Sep 2005
Posts: 172
From: Valencia, CA
steering rack: LT1 > LS1
well my wheel has play, and the tie rods and ball joints are fine, and the bushings and joints in the linkage look okay, so ive determined its the rack.
would switching to an LS1 rack be an upgrade as opposed to just replacing mine with another LT1 rack? are the splines on the linkage the same?
i'd like to use the LT1 linkage, a friend of mine had a problem with his header install on his LT1 with LS1 linkage.
would switching to an LS1 rack be an upgrade as opposed to just replacing mine with another LT1 rack? are the splines on the linkage the same?
i'd like to use the LT1 linkage, a friend of mine had a problem with his header install on his LT1 with LS1 linkage.
Registered User
Joined: Feb 2002
Posts: 1,534
From: Lousiana
It maybe the rag joint. Check out the rag joint eliminator here:
http://www.unbalancedengineering.com/Camaro/
JD
http://www.unbalancedengineering.com/Camaro/
JD
Last edited by PoorMan; Nov 5, 2006 at 08:06 AM.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
ro2207
LT1 Based Engine Tech
14
Dec 4, 2014 06:18 PM
chevroletfreak
LT1 Based Engine Tech
202
Jul 4, 2005 05:00 PM
ZBLKHELLRZR
Drag Racing Technique
4
Aug 18, 2002 07:57 AM