possible bad master or booster?
Thread Starter
Registered User
Joined: Sep 2005
Posts: 172
From: Valencia, CA
possible bad master or booster?
when i press my brake pedal all the way to the floor it seems as if its not applying the brakes all the way. especially at higher speeds. my pedal travel is fine so im suspecting a possible master or booster issue. does this sound like a common problem?
btw, ive got R1 concepts rotors and centric OE pads. i had this same problem with my prior autozone rotors/pads too. no leaks anywhere in the system, its got new fluid and its been bled several times.
btw, ive got R1 concepts rotors and centric OE pads. i had this same problem with my prior autozone rotors/pads too. no leaks anywhere in the system, its got new fluid and its been bled several times.
Last edited by NoRiceInside; Aug 19, 2007 at 11:04 PM.
Registered User
Joined: Sep 2002
Posts: 3,456
Bad booster would make the pedal "HARD" to push down.... The master cylinder might be bypassing (seal worn)... That would allow the pedal to feel soft or go to floor...
Might try bleeding first... Also check for worn hoses...
Might try bleeding first... Also check for worn hoses...
Thread
Thread Starter
Forum
Replies
Last Post
Ringmaster72
Parts For Sale
1
Mar 19, 2015 03:32 PM