(also posted on LS1tech)
QA1 apparently doesn't reply to e-mails..
been on hold for an hour..
4th gen front single adjustable QA1's..
was using the stock spring with my fabricated lower spring cup..
now I've gone to the 2 1/2" spring... bought the adapter kit..
but I don't know what to do with the stock upper spring cup/mount..
the stuff in the kit can't possibly work on their own..
any info would be greatly appreciated..
Thanks Ahead!
Matt

 

pictures?

So this is a QA1 Adapter kit, do you have a model/parts # for it?

 

takes these 2 part numbers
QA1 Coil over stud top conversion kit for 2-1/2" spring
part # AQ1/SS112SDM

QA1 upper spring cap
part# QA1/9018-101

 

I'm not having any luck finding any info on those part numbers, even on the QA1 website!

Where did you get you info from, do they have any photos?

 

turns out..
they send ya parts you don't need..although you pay for them..
the bushings are not used..