Me three!!!!

 

Don't forget to e-mail support@racetronix.com for a copy of the installation instructions.

 

I emailed ya'll for a copy of instructions, but it just kicked back a generic message. Who's the easiest to get instructions from...you or Thunder. Thanks.

John

 

You will get a copy e-mailed to you in short order.
We are working on some revisions over the next couple days.
You should have the instructions by the time the kit shows up at your door.

 

They sent me a copy yesterday, so I forwarded it to you. So look for email from Fireboy425@aol.com

 

We have an update for the harness coming so you may want to send a request by the middle of the week.

 

Do you have to pull the whole tank or can you trap door it to install the pump and harness?

 

The TD method has been debated over and over again on this forum. We do not recommend the TD method for two reasons.

1) Cutting into the metal above the tank can be very hazardous.
2) The fuel tank should be thoroughly cleaned before installing a new pump.

Walbro no longer offers the same 'no questions asked' warranty. If you don't flush the tank you are taking a gamble on your own. Most F-LT1 tanks need a good cleaning given their age.

 

I'd also like to thank TR & Racetronix for this GP. I also would like to thank all the people that stepped up and made a purchase. You were all as important.

Thanks,


Steve.

 

I would also like to thank everyone that stepped up and made this group purchase happen and to Thunder & racetronix as well. By the way RACETRONIX can you email me a copy of the instructions I would greatly appreciate it.
Thanks,
Daniel

 

Man, that was fast!! Got mine this morning!! Thanks for the shipping heads up Angie! Looking forward to doing more business with ya. I forgot how close ya'll are to me. Went by Baton Rouge to go gambling this weekend. Thanks again.
John

 

I must apologize guys. I am running behind on the new manual for the new Racetronix F-LT1 harness. Some people have e-mailed us for a manual but did not state if it was for the pump assembly alone or the complete system. If you bought the pump assembly by itself please state this so we can send you the temporary manual.

If you require a manual for the harness and the pump assembly please sit tight for another day. The new manual for the harness (rev 1) will be ready in a day or two. It is very nice and easy to follow with color pictures. The manual for the old harness will not work with the new harnesses we are shipping as there has been a change to the configuration which involves the RX-FLT1-FSCS parts bag. I am keeping a list of inquiries and the manual will be sent out in PDF format. Once you receive the manual please feel free to send your comments, recommendations or pictures to support@racetronix.com.

Thank you for your patience and understanding.

Jack
Racetronix

 

Good news. The harness manual is complete and has been sent out via e-mail in PDF format.The attached fuel pump installation manual is temporary and will be replaced with a full color manual within the next short while. All the detailed info is provided to make the installation as smooth as possible. Be sure to read the manuals from front to back before you open your toolbox. It is always best to know what you are getting into before you start a project. If you have any questions regarding the installation procedure please contact support@racetronix.com.

We are not able to provide proper support via this forum.

Thanks!

 

Jack,

Could you please email a copy of the manual for the LT1 pump and harness to psycho6@comcast.net? I've received the pump & harness and was waiting for the new manual release.

Thanks,


Steve.

 

Send some my way also for the pump and harness LT1.... Thanks
RMTransam@aol.com