Final chance at getting a set of Bob Bishop C5 to F-body Brake Conversion Brackets...
Banned
Joined: Jul 2001
Posts: 3,604
From: Milton, FL
Re: Final chance at getting a set of Bob Bishop C5 to F-body Brake Conversion Brackets...
Originally Posted by SpeedSpecialty
They all shipped today, execpt for a couple that were either to go to a PO box or out of the 48 states.
You should be getting an e-mail direclty from FedEx with your shipping information, if you don't in the next 24 hours feel free to e-mail us.
So that should do it! Thanks to all for making this last one possible!
You should be getting an e-mail direclty from FedEx with your shipping information, if you don't in the next 24 hours feel free to e-mail us.
So that should do it! Thanks to all for making this last one possible!
Registered User
Joined: Sep 2000
Posts: 177
Re: Final chance at getting a set of Bob Bishop C5 to F-body Brake Conversion Brackets...
I didn't get an e-mail and I was first on the list....
I will e-mail you. I hope you didn't use the e-mail that paypal tried to use as my contact There was a mix up there..
Z~
I will e-mail you. I hope you didn't use the e-mail that paypal tried to use as my contact There was a mix up there..
Z~
Re: Final chance at getting a set of Bob Bishop C5 to F-body Brake Conversion Brackets...
Registered User
Joined: Jul 2000
Posts: 66
From: Occoquan, VA
Re: Final chance at getting a set of Bob Bishop C5 to F-body Brake Conversion Brackets...
Fed Ex just dropped mine off. They are sweet. Thanks again Bob for doing this for us. Thanks to Speed Specialty and Steve in Seattle for sending emails to everyone keeping hope alive 
Thread Starter
Registered User
Joined: May 2003
Posts: 260
Re: Final chance at getting a set of Bob Bishop C5 to F-body Brake Conversion Brackets...
Originally Posted by FlatIronsZ
SpeedSpecialty, I've PM'ed you guys as I've not heard doodly squat about my bracket shipment.
However, we did receive an e-mail from you, to which we replied right away.
We'll resend it.
Registered User
Joined: Sep 1999
Posts: 32
From: Littleton, CO, USA
Re: Final chance at getting a set of Bob Bishop C5 to F-body Brake Conversion Brackets...
Originally Posted by SpeedSpecialty
That's funny, we do not have PMs enabled.
However, we did receive an e-mail from you, to which we replied right away.
We'll resend it.
However, we did receive an e-mail from you, to which we replied right away.
We'll resend it.
--James
Thread Starter
Registered User
Joined: May 2003
Posts: 260
Re: Final chance at getting a set of Bob Bishop C5 to F-body Brake Conversion Brackets...
Originally Posted by FlatIronsZ
Your e-mail yesterday did not include the shipping information that is in your "resent" e-mail this evening. Thank you most kindly for the info.
--James
--James
No matter, as long as you got it this time.
Banned
Joined: Jul 2001
Posts: 3,604
From: Milton, FL
Re: Final chance at getting a set of Bob Bishop C5 to F-body Brake Conversion Brackets...
got them installed ... phew that was more difficult than expected
but they are on and seem to be working! at least the wheels didn't fall off while driving home thanks!
one tip however for those who are going to do this:
- shave the bumps off the C5 brake lines before you start
- use both the lock washer and the regular washer on the two bolts to bolt the caliper assembly on. one of the guides online says not to use the locking washer because it breaks, however if you don't use it then the bolts will stick out too far and impact the rotor.
- read the instructions a few times all the way through, and then have a buddy read them. they are very in depth and are easy to get lost in, especially at 2am.
but they are on and seem to be working! at least the wheels didn't fall off while driving home
thanks!one tip however for those who are going to do this:
- shave the bumps off the C5 brake lines before you start
- use both the lock washer and the regular washer on the two bolts to bolt the caliper assembly on. one of the guides online says not to use the locking washer because it breaks, however if you don't use it then the bolts will stick out too far and impact the rotor.
- read the instructions a few times all the way through, and then have a buddy read them. they are very in depth and are easy to get lost in, especially at 2am.
Last edited by anasazi; Jul 31, 2004 at 03:17 AM.
