Weld-In SFC's installation?
04-07-2004, 08:29 AM
#1
Registered User
Thread Starter
Join Date: Jul 1999
Location: Florida
Posts: 249
Weld-In SFC's installation?
Where should I take my car(1994 Z28) to have my sfc's welded in? I don't have the tools and experience to do the job, and I would rather not have some shop catch my car on fire because they inadvertantly cut a fuel line. I'm in Daytona. Thanks for suggestions.
04-08-2004, 11:47 AM
#4
Registered User
Join Date: Oct 2003
Location: Orlando, FL
Posts: 132
Originally posted by Lasombra52
I think Norris Motorsports does them for $100. Might want to give them a call. I had a buddy do my installation for me.
I think Norris Motorsports does them for $100. Might want to give them a call. I had a buddy do my installation for me.
04-08-2004, 12:07 PM
#5
Registered User
Thread Starter
Join Date: Jul 1999
Location: Florida
Posts: 249
Originally posted by StormSigma
Your buddy charge less than a hundred bucks by any chance?
Your buddy charge less than a hundred bucks by any chance?
It's also looking like I'll have some shocks and springs to install so I'll probably just get this all done at once. I'm guessing Norris could handle that as well?
04-08-2004, 12:50 PM
#6
Registered User
Join Date: Aug 2001
Location: Deltona, FL, USA
Posts: 261
Norris should be able to do the spring and shock install.
About my friend doing the isntall. I really doubt it sorry. I traded some work (I'm a Project Manager with a Landscape Architecture company) for the install. He needed a design for his house as well as a good price on the plants. So we swapped. Sorry. But He will probably NOT do it for less than $100.
Page Tyler from this board. I think his name is Mr. T's Z or something like that. He is the welder that works at Norris. He will know for sure what's what.
Also try the Lethally Injected F-bodies website, he hangs out there as well.
About my friend doing the isntall. I really doubt it sorry. I traded some work (I'm a Project Manager with a Landscape Architecture company) for the install. He needed a design for his house as well as a good price on the plants. So we swapped. Sorry. But He will probably NOT do it for less than $100.
Page Tyler from this board. I think his name is Mr. T's Z or something like that. He is the welder that works at Norris. He will know for sure what's what.
Also try the Lethally Injected F-bodies website, he hangs out there as well.
04-08-2004, 01:12 PM
#7
Registered User
Join Date: Oct 2003
Location: Orlando, FL
Posts: 132
Originally posted by Lasombra52
Norris should be able to do the spring and shock install.
About my friend doing the isntall. I really doubt it sorry. I traded some work (I'm a Project Manager with a Landscape Architecture company) for the install. He needed a design for his house as well as a good price on the plants. So we swapped. Sorry. But He will probably NOT do it for less than $100.
Page Tyler from this board. I think his name is Mr. T's Z or something like that. He is the welder that works at Norris. He will know for sure what's what.
Also try the Lethally Injected F-bodies website, he hangs out there as well.
Norris should be able to do the spring and shock install.
About my friend doing the isntall. I really doubt it sorry. I traded some work (I'm a Project Manager with a Landscape Architecture company) for the install. He needed a design for his house as well as a good price on the plants. So we swapped. Sorry. But He will probably NOT do it for less than $100.
Page Tyler from this board. I think his name is Mr. T's Z or something like that. He is the welder that works at Norris. He will know for sure what's what.
Also try the Lethally Injected F-bodies website, he hangs out there as well.
04-08-2004, 03:08 PM
#8
Registered User
Join Date: Jun 2002
Location: UCF
Posts: 452
Tyler doesn't work at Norris anymore, but I'll refer this post to Gary, who works there. You can check out the message board at www.lethallyinjected.net, too. Both of them hang out over there.
Ryan
Ryan
04-08-2004, 03:35 PM
#9
Registered User
Thread Starter
Join Date: Jul 1999
Location: Florida
Posts: 249
Originally posted by redcamaroz28
Tyler doesn't work at Norris anymore, but I'll refer this post to Gary, who works there. You can check out the message board at www.lethallyinjected.net, too. Both of them hang out over there.
Ryan
Tyler doesn't work at Norris anymore, but I'll refer this post to Gary, who works there. You can check out the message board at www.lethallyinjected.net, too. Both of them hang out over there.
Ryan
04-08-2004, 11:05 PM
#12
Registered User
Join Date: Mar 2004
Location: Oviedo, FL
Posts: 376
I believe Norris wants $200 for an SFC install, just what I've heard though. Give Brett Downs at MASC a call at 1-877-891-5550. Either him or Carter Edwards should be able to hook you up for a decent price.
Thread
Thread Starter
Forum
Replies
Last Post
GA93FORMULA
Drag Racing Technique
0
07-24-2002 11:38 PM