LT1 block, eagle rods, rings/bearings, ASP hub, 50lb injectors
05-22-2006, 09:31 PM
#1
Registered User
Thread Starter
Join Date: Dec 2003
Location: Jacksonville, FL
Posts: 207
LT1 block, eagle rods, rings/bearings, ASP hub, 50lb injectors
STD bore LT1 block: $200
NIB Eagle 4340 5.7" rods: $300
NIB total seal rings: $90
NIB clevite h-series bearings: $90
NIB ASP billet LT1 crank hub: $100
MSD 50 lb injectors: $200
The block has new cam bearings, but needs to be cleaned again. 1/4-1/2 has surface rust that just scrapes off. The injectors were used for 2000-3000 miles.
Wade
onlyone07@aol.com
NIB Eagle 4340 5.7" rods: $300
NIB total seal rings: $90
NIB clevite h-series bearings: $90
NIB ASP billet LT1 crank hub: $100
MSD 50 lb injectors: $200
The block has new cam bearings, but needs to be cleaned again. 1/4-1/2 has surface rust that just scrapes off. The injectors were used for 2000-3000 miles.
Wade
onlyone07@aol.com
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
10-31-2016 11:09 AM
chevroletfreak
LT1 Based Engine Tech
202
07-04-2005 05:00 PM