I am debating witch of these three cam to get(or not to get) and i would really just like to see, drive in one of these cars. I am in daytona, Just let me know if theres anyone in the daytona, deland deltona, orlando, flagler new symerna(sp???)
Thanks guys

 

I talked a little with you Fri the 18 at the track, (getting better 60') I have the 30th anniversary SS with the T-Tops.

I have the XE 236şIn-242şEx with 1.6 rockers and a LC of 114ş and run an auto with a PI 2800 stall. It is very streetable for me with this set up. The rest of story is LT4 CNC heads and intake and stroked to 383 ci. Good vacuum and idle. Real responsive on throttle!
If I had a choice between a XE cam and reg, I'd go XE!
Ray

 

you seem to have a good setup. i would be going with the XE 224/230. the 383 will tame the cam also. I will be running stock heads so i was looking into more are a mid range.

 

Hey Kenney,

My 224/236 @ 113+5 XE cam works quite well for my 350 LT1 Impala.

A best of 13.0 & 107 NA, and 11.73 & 117.92 N2O in a 4400lb car