South Atlantic Delaware, Florida, Georgia, Maryland, North Carolina, South Carolina, Virginia, and West Virginia

1989 4x4 blazer FS

Thread Tools
 
Search this Thread
 
Old Mar 6, 2005 | 08:13 PM
  #1  
camzaro28's Avatar
Thread Starter
Registered User
 
Joined: Apr 2004
Posts: 1,046
From: Fargo, ND
1989 4x4 blazer FS

89 blazer with 188,000 miles. just recently got new plugs and wires. and a new starter today. within the last 10k miles, water pump, alternator and battery. had K&N filter and flowmaster.
now the bad things. window motors work, but the module on the drivers side has corroded at the wires, i havent soldered them back. so the windows dont go down. i have someone looking up where each wires goes adn he is gonna fix it, hopefully. the blower motor for the a/c recently went. that should be fixed to. then, after 10-15 mintues of driving the oil psi drops to 0 and the check gages light comes on. only happens at idle, when u come to a stop. i have been told that it could be the oil pickup line. but when u are driving the oil psi is above 45. dont think it is the motor. the motor was rebuilt at 100k.
give me an offer. have to sell within the next few weeks
Old Mar 6, 2005 | 08:30 PM
  #2  
Caps94ZODG's Avatar
Registered User
 
Joined: Apr 2000
Posts: 3,748
From: New England
Re: 1989 4x4 blazer FS

brian ill give you 50 bucks and a stuffed bunny for it
Old Mar 6, 2005 | 08:34 PM
  #3  
camzaro28's Avatar
Thread Starter
Registered User
 
Joined: Apr 2004
Posts: 1,046
From: Fargo, ND
Re: 1989 4x4 blazer FS

sorry man ill have to pass on that one! good try though
Old Mar 6, 2005 | 10:29 PM
  #4  
Caps94ZODG's Avatar
Registered User
 
Joined: Apr 2000
Posts: 3,748
From: New England
Re: 1989 4x4 blazer FS

ok ok TWO bunny's you drive a hard bargain...
Old Mar 7, 2005 | 06:49 AM
  #5  
Caps94ZODG's Avatar
Registered User
 
Joined: Apr 2000
Posts: 3,748
From: New England
Re: 1989 4x4 blazer FS

but seriously..its a little rough around the edges but built like a tank and runs good
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
linz
3rd Gen / L98 Engine Tech
1
Oct 22, 2015 07:59 AM
Jonnybegood
Parts Wanted
0
Feb 10, 2015 07:50 AM
Irocvette355
3rd Gen / L98 Engine Tech
4
Aug 8, 2002 01:33 PM
Irocvette355
3rd Gen / L98 Engine Tech
1
Aug 3, 2002 02:23 PM




All times are GMT -5. The time now is 12:42 AM.