Lean @ idle and engine breaking
Lean @ idle and engine breaking
Just got my turbo setup going on my LT1. I also installed a wide band. I am lean at idle, 16-17:1 and if I down shift and engine break my wideband says full lean. 22.4:1
If I touch the gas peddle at all it comes right down to 13:1. Any ideas? Could this be a vacume leak?
Im not sure if it was like this before the turbo or not?
If I touch the gas peddle at all it comes right down to 13:1. Any ideas? Could this be a vacume leak?
Im not sure if it was like this before the turbo or not?
I figured this would go in LT1 tech b/c im not under boost at idle. I have a boost sensitve FPR, but its not on the car yet. Should It matter if I am at idle not under boost?
My AFR is fine everyplace else.
My AFR is fine everyplace else.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM



