LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

Low RPM Miss Stumble (could someone look at the datalog)

Thread Tools
 
Search this Thread
 
Old Apr 5, 2007 | 09:14 PM
  #1  
xstoyz's Avatar
Thread Starter
Registered User
 
Joined: Sep 2003
Posts: 220
From: Tiverton, RI Yonkers, NY
Low RPM Miss Stumble (could someone look at the datalog)

I have been having some issues with a miss/stumble. There have been no codes from this issue. The Miss/Stumble happenes below 2500rpm and is noticable when there is load on the engine. The datalog shows a short trip around the neighborhood with 2 very short highway runs. I included both the .csv file (excel) and the .atl file (autotap). Any help would me greatly appreciated.

http://www.mediafire.com/?0k02jyh4hnn (Autotap)

http://www.mediafire.com/?9jytd0jbjtd (Excel)

Last edited by xstoyz; Apr 5, 2007 at 09:17 PM.
Old Apr 5, 2007 | 09:21 PM
  #2  
79prix's Avatar
Registered User
 
Joined: Apr 2007
Posts: 82
From: Roscoe IL/Melrose Park IL
have you tried having the car run and spraying carb cleaner and seeing if rpms change may be a vacuum leak
Old Apr 5, 2007 | 09:23 PM
  #3  
79prix's Avatar
Registered User
 
Joined: Apr 2007
Posts: 82
From: Roscoe IL/Melrose Park IL
just thought of another thing buddy needs to replace E.S.C for same issue a tech told him sometimes it won't trigger the check engine light
Old Apr 5, 2007 | 09:32 PM
  #4  
xstoyz's Avatar
Thread Starter
Registered User
 
Joined: Sep 2003
Posts: 220
From: Tiverton, RI Yonkers, NY
I will try the carb cleaner tomorrow. Good idea.

ok you stumped me what is E.S.C?
Old Apr 6, 2007 | 10:48 AM
  #5  
xstoyz's Avatar
Thread Starter
Registered User
 
Joined: Sep 2003
Posts: 220
From: Tiverton, RI Yonkers, NY
Ttt
Old Apr 6, 2007 | 11:20 AM
  #6  
79prix's Avatar
Registered User
 
Joined: Apr 2007
Posts: 82
From: Roscoe IL/Melrose Park IL
Electronic Spark Control there are 8 differnt kinds maid for these year cars need to find were its located could be in a # of places then bring it to a part store and based off the manufacturer # they can get you the correct one
Old Apr 6, 2007 | 06:32 PM
  #7  
79prix's Avatar
Registered User
 
Joined: Apr 2007
Posts: 82
From: Roscoe IL/Melrose Park IL
if carb cleaner didnt do anything spray water on plug wires and see if you get a miss a good mist should do the trick
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
AlaskaZ28
LT1 Based Engine Tech
9
Jan 1, 2015 12:30 PM
AlaskaZ28
LT1 Based Engine Tech
4
Dec 16, 2014 07:24 PM
AlaskaZ28
New Member Introduction
2
Dec 10, 2014 02:39 PM
AlaskaZ28
LT1 Based Engine Tech
1
Dec 10, 2014 02:37 PM
sleeperZ96BT
LT1 Based Engine Tech
300
Jun 5, 2005 09:33 PM




All times are GMT -5. The time now is 11:26 AM.