Where to purchase a new oil pump?
Thread Starter
Registered User
Joined: Apr 2001
Posts: 369
From: Toronto, Ontario, Canada
Where to purchase a new oil pump?
94 LT1.
GM lists two different pickup assemblies, one larger than the other, but one oil pump.
Is this new information on LT4 vs LT1 differences?
Any suggestions on where to get a stock pressure stock flow oil pump? Is this a good dealer item?
Thanks in advance.
GM lists two different pickup assemblies, one larger than the other, but one oil pump.
Is this new information on LT4 vs LT1 differences?
Any suggestions on where to get a stock pressure stock flow oil pump? Is this a good dealer item?
Thanks in advance.
Registered User
Joined: Dec 1969
Posts: 27,727
From: Little Rock, AR
Actually, they list 2 pumps and each has a screen that matches.
If you want the one with the larger pickup tube (.742 diameter), get
oil pump screen 12550042
oil pump 12555283
This is what was used on the LT1 1995-1997.
If you want the one with the larger pickup tube (.742 diameter), get
oil pump screen 12550042
oil pump 12555283
This is what was used on the LT1 1995-1997.
Registered User
Joined: Aug 1998
Posts: 331
From: IL
Originally posted by DrewHMS97SS
could go canton. but that intales a few other things
look over at racenet.net
could go canton. but that intales a few other things
look over at racenet.net
Brian
Thread Starter
Registered User
Joined: Apr 2001
Posts: 369
From: Toronto, Ontario, Canada
Originally posted by shoebox
Actually, they list 2 pumps and each has a screen that matches.
If you want the one with the larger pickup tube (.742 diameter), get
oil pump screen 12550042
oil pump 12555283
This is what was used on the LT1 1995-1997.
Actually, they list 2 pumps and each has a screen that matches.
If you want the one with the larger pickup tube (.742 diameter), get
oil pump screen 12550042
oil pump 12555283
This is what was used on the LT1 1995-1997.
Registered User
Joined: Sep 2003
Posts: 1,917
From: Las Vegas
if i remember right, with the canton pan, all you have to do is get a mounting bolt. it has been a long while since i have read anything on the subject. check out racenet.net, they have all the info you need.
Thread
Thread Starter
Forum
Replies
Last Post