LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

question on power loss (after gutted cat)

Thread Tools
 
Search this Thread
 
Old Nov 27, 2003 | 08:54 AM
  #1  
predator's Avatar
Thread Starter
Registered User
 
Joined: Jun 2003
Posts: 741
From: Orlando, FL
question on power loss (after gutted cat)

can this cause power loss? it seems after this was done my car has lost its umph
Old Nov 27, 2003 | 11:58 AM
  #2  
$hawn's Avatar
Registered User
 
Joined: May 2001
Posts: 642
From: Wichita, Kansas
No, cant cause a power loss, but it more than likely shifted the power and torque range.
Old Nov 27, 2003 | 12:00 PM
  #3  
predator's Avatar
Thread Starter
Registered User
 
Joined: Jun 2003
Posts: 741
From: Orlando, FL
just feels like off the line until about 1500 i have no power now and in 2nd gear punch it bogs all the normal stuf is new opti exetra
Old Nov 27, 2003 | 12:12 PM
  #4  
brandboZ28's Avatar
Registered User
 
Joined: Feb 2002
Posts: 614
From: Tallahassee, Fl
How it was explained to me is that with the cat in place, you have plenty of backpressure which helps produce low end torque. When you get rid of a cat or in your case, gut it, you lose that back pressure and the torque you are so used to having down low has moved up the rpm range just a bit. I recently removed my cat, agian, and its true, you do lose some low end torque but gain plenty of top end power from it.
Old Nov 27, 2003 | 02:42 PM
  #5  
b-stevens's Avatar
Registered User
 
Joined: Sep 2003
Posts: 666
From: Elk Grove Vlg, IL
What year?
Old Nov 27, 2003 | 03:09 PM
  #6  
predator's Avatar
Thread Starter
Registered User
 
Joined: Jun 2003
Posts: 741
From: Orlando, FL
94
Old Nov 27, 2003 | 07:41 PM
  #7  
Z95m6's Avatar
Registered User
 
Joined: Oct 2001
Posts: 6,070
From: newton, kansas, USA
When i had my off-road pipe i was picking up false knock almost 5 degrees at idle and when i put a cat, back on the car it all went away. Needless to say i picked up alot of power going back to the cat setup and the car sounded much better.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
thenewkid
New Member Introduction
5
Nov 27, 2014 09:41 AM
tubby
Forced Induction
7
Oct 13, 2003 09:16 AM
CamaroZBoy
Car Audio and Electronics
0
Sep 1, 2002 09:48 AM
CamaroZBoy
Car Audio and Electronics
2
Aug 19, 2002 12:41 PM
CamaroZBoy
Car Audio and Electronics
0
Aug 16, 2002 10:03 PM




All times are GMT -5. The time now is 02:32 AM.