Hey guys, i plan a Hot cam kit swap with a set of different mildly ported heads....

Anyone have every single part pr part numbers for their swap that they did?

I have all lifters, pushrods etc...

Just need any bolts, 94 Timing chain/cover, ALL gaskets (impala head gaskets), basically anything and everything.

Just wanted to see if any had their list handy.

Thanks guys

 

Well you're gonna be spending some money. I thought I would do this on the cheap, but no.

Anyway, I went down to the local parts store and got waterpump gaskets(Napa), got my exhaust gaskets from Autozone. I got my intake gaskets from GM, but I used them to port. Instead of using a timing cover gasket I used some RTV.

Ah man the list goes on and on. I haven't even figured it up yet because I'm not done. It's not an easy job either, it helps to have friends that can lend a hand.

John

 

Here goes:
1- Felpro head gasket 1074,
2- Felpro intake gasket 1284,
3- Felpro header gasket 1406,
4- Felpro timing cover set (includes h2o gaskets, seals, and cover gasket). pn ???
5- ARP 134-3601, head bolts.

Good luck

 

I just bought a complete top end today from combination motorsports.


They have a "cam swap kit" for gaskets. Just call them and tell them you need everything

It was easyier than trying to make a list.

I told seth i needed a cam and his stage 2 heads and everything to swap them. Pretty easy

 

What other things are needed besides gaskets?