I am wondering what my injectors should ohm. My car is a '94Z & it still has the stock injectors which I believe are 24# injectors. Is there a # they should read or if they are all the same then that is the #?

Thanks
Eddie

 

They should all read "the same" or darn close, if one or more are off they could be bad or on thier way out. Stockers are high impedance and you must stick with them if you dont run a dropping resistor, injectors should be around 12 OHM I believe, someone else will post I'm sure.

 

All good and working stock injectors I've measured were either 12.5 or 12.6 Ohms. Bad ones also measured 12.5. (which means they were just plugged with crap but the coil was still good)

 

Thank you....