So I found a buffer at work..
#1
So I found a buffer at work..
Hah, go figure right? A nice little dewalt random orbital buffer. The formula could definately use a good clay bar/polish/wax, and finding this with spring just around the corner has already told me what I'll be doing in a few weeks lol. You guys have any tips for a first time using one of these things? Like what's a good buffer pad to use and compounds for that matter? Never used a buffer before at all... so any help you can give me is highly appreciated!
#3
there are some 3M "how to" videos out there... very informative... dude is "hawking" his products, but he shows technique and what pads are for what etc...
I found them when considering repainting my car myself... autobody101 or some similar site..
JT
I found them when considering repainting my car myself... autobody101 or some similar site..
JT
#4
#6
Hah, go figure right? A nice little dewalt random orbital buffer. The formula could definately use a good clay bar/polish/wax, and finding this with spring just around the corner has already told me what I'll be doing in a few weeks lol. You guys have any tips for a first time using one of these things? Like what's a good buffer pad to use and compounds for that matter? Never used a buffer before at all... so any help you can give me is highly appreciated!
#9
An orbital buffer isn't as dangerous as a regular buffer. I have found the best luck in using orbital is to wipe the wax on by hand but don't let it dry completely. Leave the machine on the surface when starting machine or the pad will fly off. I just went over a Grand Prix with the Mothers clay bar, and the car was covered with overspray, I couldn't believe the results. The car is white and it took everything off. Then I went over it with Carbrite Tropiglow Carnuba, then with Carbrite Yellow Carnuba. Great results. Good luck with buffer, I always had better luck with good old elbow grease.
Thread
Thread Starter
Forum
Replies
Last Post
Nayr
LT1 Based Engine Tech
7
03-03-2023 08:34 PM