Painting question
Thread Starter
Registered User
Joined: May 2004
Posts: 1,059
From: NJ
Painting question
please correct me if i am wrong. If i were to paint a part (fuel rail covers, nothing major, so it doesnt have to be perfect, but close), here are the steps i would use:
1: already prepped.
2: wet sand with 360 grit
3: primer
4: wet sand again
5: base coat
6: top coat
7: wet sand with 600 grit
8: clear coat
9: wet sand 1500-2000 grit and buff
1: already prepped.
2: wet sand with 360 grit
3: primer
4: wet sand again
5: base coat
6: top coat
7: wet sand with 600 grit
8: clear coat
9: wet sand 1500-2000 grit and buff
Thread
Thread Starter
Forum
Replies
Last Post
Patricklt1
Show and Shine / Paint and Body Care
4
Apr 24, 2015 06:29 AM
ModdedNerd
General 1967-2002 F-Body Tech
2
Dec 14, 2014 10:28 AM