Does anyone know of a recomended pait gun? I am looking at getting a pait gun for painting a project car. I was wondering if anyone knew of someone in body shop that could recomend a good gun. I want something that will really work and get professional results.

 

Snap-on BF700 Gravity Feed, as long as you have a general idea of how to spray you'll be all set, I've had lot's of success with that gun, and it works good with metal flake too, I used it to paint my Peterbilt tractor and had no problems at all with it. Good Luck with the paint job

 

I agree with CamaroKid on the gun. It takes lots of practice to get professional results..

Cory

 

Sata, Devilbiss, Binks and Sharp are all names I have used and had great results with all of them, Prices would start at around 150 and go to around 500. Make sure you have a good system for pulling the water and oil out of the air, or it wont matter what gun you use.

 

yea deffinatly make sure you use a water seperator with your compressor, or at least make sure you frequently drain the water from the compressor tank

 

I have always used a sata jet 500.

 

check out ebay. i got a sata NR 2000 HVLP for $315 brand new in the box. thats a $500 gun. i am a painter at a bodyshop and i use all sata guns

 

i agree that sata is prob the best. i just got a sharpe T1 as a gift and it sprays great.