huge cradboard box scraped my car
i was sitting at a red light minding my business (it was very very windy)......well i see this huge cardboard box floating across this field then it comes to the street and strait for my car, theres a car in front of me and a car behind me, so what could i do, well it brushed against my car, when i got back to work i looked at it, there are very long light scrathes on the quarter panel, i waxed it with macguires, didnt help, rubbing compound??? or what??? any ideas, and particular brands to use and a method to apply....pleae help....i have a brand new buffing wheel i never used, im too worried ill mess up the paint......what do u guys think?
Heh, that sucks, but sounds like something that would happen to me, it's usually my luck. Anyway, try the Meguiar's Scratch X or 3M Swirl Remover #39009. The Scratch X will probably do the trick, unless the scrapes are pretty severe. Apply against the direction of the scratch in back and forth motions, followed by up/down motions (along the scratch). Rub the product in with a cotton applicator with medium to slightly heavy pressure until you notice it's going away, then lighten up a bit to finish the polishing action and bring up gloss. Finish with your favorite wax or sealant.
Good Luck!

------------------
*Mike's 1992 Camaro RS 25th Anniv.*
Dark Red Metallic (ext.) / Flame Red (int.)
Flowmaster Crossflow, K&N, 20% 3M Panther Black Tint
JL Audio 3 10", PPI PC2100, Kenwood eXcelon KRC-953H/U, Kenwood / Pioneer speakers
Show Car Shine by ZAINO! - Special Thanks to Sal Z!
Good Luck!

------------------
*Mike's 1992 Camaro RS 25th Anniv.*
Dark Red Metallic (ext.) / Flame Red (int.)
Flowmaster Crossflow, K&N, 20% 3M Panther Black Tint
JL Audio 3 10", PPI PC2100, Kenwood eXcelon KRC-953H/U, Kenwood / Pioneer speakers
Show Car Shine by ZAINO! - Special Thanks to Sal Z!
Thread
Thread Starter
Forum
Replies
Last Post
PFYC
Supporting Vendor Group Purchases and Sales
0
Dec 17, 2014 11:00 AM
PFYC
Supporting Vendor Group Purchases and Sales
0
Dec 4, 2014 11:56 AM



