Best Stuff To Use To Get The Rust Or Rust Spots Off Of Tailpipes??
Thread Starter
Registered User
Joined: Dec 2001
Posts: 3,674
From: Chicago, IL
Best Stuff To Use To Get The Rust Or Rust Spots Off Of Tailpipes??
What stuff do you guys use?
I was using the turtle wax rust remover stuff, but i know theres gotta be better stuff out there..
thanks guys
I was using the turtle wax rust remover stuff, but i know theres gotta be better stuff out there..
thanks guys
Registered User
Joined: Nov 2000
Posts: 795
From: In exile
How big are your rust spots? I had a bunch of little ones on my exhaust tip last winter and a claybar took them all off. After claying, I used a little bit of Mothers metal polish and it looked brand new.
Registered User
Joined: Jul 2001
Posts: 61
From: Carlisle,PA
Never Dull is the name of the Eagle one product in a can. I used it about a week ago on my tips and they look like brand new got the rust spots out and shined them up. Believe me after the winter we had in PA they looked like crap Now they look perfect.
Registered User
Joined: Jul 2002
Posts: 1,665
If want to get them off real easy, use no. 7 rubbing compound followed by a coat of wax for protection. I use to use mothers metal polish, but i got tired of the work, so i turned to the rubbing compound and it stripped the rust off like it was nobodys business.
Registered User
Joined: Dec 2000
Posts: 1,564
From: Memphis, TN
Yeah, I'd recommend NevrDull....great stuff and cheap too! 
Either that or just grab a good metal polish, like Mother's, Blue Magic, etc..... and polish the hell outta them until they shine like a new penny!
You can get any or all of these products at most local auto parts stores, AutoZone, NAPA, O'Reilley's, even WalMart....
Either that or just grab a good metal polish, like Mother's, Blue Magic, etc..... and polish the hell outta them until they shine like a new penny!
You can get any or all of these products at most local auto parts stores, AutoZone, NAPA, O'Reilley's, even WalMart....
Registered User
Joined: Jul 2002
Posts: 1,665
An important thing to consider is that not all grades of stainless steel are meant to shine forever. Some like the stock exhausts are supposed to look like S**T. It is this protective layer that actually protects the metal. Continuous cleaning of this will actually make it rust more.
Thread Starter
Registered User
Joined: Dec 2001
Posts: 3,674
From: Chicago, IL
Originally posted by KungFu
I used Neverdull and Mothers Alum Polish and it cleaned them up pretty good. However, I plan on going over them with some 600grit sand paper and buffing them out to chrome look.
I used Neverdull and Mothers Alum Polish and it cleaned them up pretty good. However, I plan on going over them with some 600grit sand paper and buffing them out to chrome look.
Registered User
Joined: Dec 2000
Posts: 2,442
From: Tacoma, WA, USA
I use #0000 steel wool (it almost feels like cotton) with Brasso. After that I use Eagle One metal polish, or MacGuire's metal polish. Any metal polish you prefer will be just fine.
The steel wool can be had at any Home Depot or Lowe's. A whole $3.00 bag of it will last you forever. You'll find that this stuff will come in handy on MANY things.
- Brent
The steel wool can be had at any Home Depot or Lowe's. A whole $3.00 bag of it will last you forever. You'll find that this stuff will come in handy on MANY things.
- Brent
Thread
Thread Starter
Forum
Replies
Last Post
ducttape1975
New Member Introduction
2
Jul 10, 2015 06:29 PM
