3m SMR w/buffer
Thread Starter
Registered User
Joined: Jun 2000
Posts: 237
From: Zanesville, Ohio
3m SMR w/buffer
I have a black car and am using a buffer for the first time. I just got this 3m stuff (39009) and Im new at this so I have some questions-
1. it says to "apply enough to work a 2ft by 2ft area". I planned on using this stuff on pretty much the whole car, will I burn a hole in the paint with this stuff?
2. The instructions say to "reduce pressure when the glaze begins to dry then polish", this means you have to change pads once it dries to "polish" it right?
3. can I use a terry cloth pad to polish it or do I need a foam one as it suggests?
Thanks a lot-
------------------
Black 97SS, M6, 2OTL, !cone, !cags, !TB, MAFmod, 160 therm, 1.6RR, Motive 3:73, BMR STB & LCA & APHR, SLP SFC, short stick, 17X11 GS, 5K swirl marks
1. it says to "apply enough to work a 2ft by 2ft area". I planned on using this stuff on pretty much the whole car, will I burn a hole in the paint with this stuff?
2. The instructions say to "reduce pressure when the glaze begins to dry then polish", this means you have to change pads once it dries to "polish" it right?
3. can I use a terry cloth pad to polish it or do I need a foam one as it suggests?
Thanks a lot-
------------------
Black 97SS, M6, 2OTL, !cone, !cags, !TB, MAFmod, 160 therm, 1.6RR, Motive 3:73, BMR STB & LCA & APHR, SLP SFC, short stick, 17X11 GS, 5K swirl marks
Registered User
Joined: Sep 1998
Posts: 1,654
From: Kenton, TN, USA
<font face="Verdana, Arial" size="2">Originally posted by SSTAT:
I have a black car and am using a buffer for the first time. I just got this 3m stuff (39009) and Im new at this so I have some questions-
1. it says to "apply enough to work a 2ft by 2ft area". I planned on using this stuff on pretty much the whole car, will I burn a hole in the paint with this stuff?
No, it is a mild product, I use it with an orbital buffer and foam pad
2. The instructions say to "reduce pressure when the glaze begins to dry then polish", this means you have to change pads once it dries to "polish" it right?
No, when I work it into the paint with the foam pad, once the product has broken down into an oil (you will know when this happens) I immediately remove the 3M before it dries with a cotton towel.
3. can I use a terry cloth pad to polish it or do I need a foam one as it suggests?
Thanks a lot-
see above
</font>
I have a black car and am using a buffer for the first time. I just got this 3m stuff (39009) and Im new at this so I have some questions-
1. it says to "apply enough to work a 2ft by 2ft area". I planned on using this stuff on pretty much the whole car, will I burn a hole in the paint with this stuff?
No, it is a mild product, I use it with an orbital buffer and foam pad
2. The instructions say to "reduce pressure when the glaze begins to dry then polish", this means you have to change pads once it dries to "polish" it right?
No, when I work it into the paint with the foam pad, once the product has broken down into an oil (you will know when this happens) I immediately remove the 3M before it dries with a cotton towel.
3. can I use a terry cloth pad to polish it or do I need a foam one as it suggests?
Thanks a lot-
see above
</font>
------------------
96 Black Impala SS
Authorized Zaino Showcar Polish Distributor
www.zainobros.com
Remember #3
Thread Starter
Registered User
Joined: Jun 2000
Posts: 237
From: Zanesville, Ohio
Thanks for the response, came out beautiful-
Pat
------------------
Black 97SS, M6, 2OTL, !cone, !cags, !TB, MAFmod, 160 therm, 1.6RR, Motive 3:73, BMR STB & LCA & APHR, SLP SFC, short stick, 17X11 GS, 5K swirl marks
Pat
------------------
Black 97SS, M6, 2OTL, !cone, !cags, !TB, MAFmod, 160 therm, 1.6RR, Motive 3:73, BMR STB & LCA & APHR, SLP SFC, short stick, 17X11 GS, 5K swirl marks
Thread
Thread Starter
Forum
Replies
Last Post
Zio
Show and Shine / Paint and Body Care
1
Aug 11, 2002 05:18 PM
