I need bolts to the following:

bellhousing to tranny, flywheel, pressure plate to flywheel, slave cylinder nuts, master cylinder U bolt nuts, inspection cover screws, lower shift boot screws

Anyone have any of these?

 

From memory, I believe they are a 3/8 coarse 1.25 long. Just go to a nuts and bolts store or to a auto store and buy grade 8.

 

They're all the same size bolt?

 

Sorry, I was only referring to the tranny to bell housing bolts, but the bell housing to motor bolts are the same. I think I used 1 inch long bolts there. For the flywheel, get bolts 1/4 inch longer than the flexplate bolts grade 8.

 

Flywheel bolts look like a special item to me. I'd get those from gm, unless someone can confirm that a plain bolt is OK. Just get the mc ubolt from the general, and it'll be easy to figure out what you need. I used self tapping "tech" screws for the inspection cover and the lower shift boot. Slave cyl nuts are easy to find, just look in your nut and bolt bin and you'll have something I'm sure.