Like the title says, I am looking for a stock LT1 intake elbow.

 

I would be interested in selling mine and getting a vortec elbow. I have a 96 Z28, if that helps. Make me an offer and if it is a decent price, I will sell. I also have a throttle body airfoil that goes in the tube, that can't be used in the vortec, so that could be sold as well, but I would need $40 for that, since it is almost brand new. Bought it right before I parked my car for the winter. Elbow is in Perfect shape. Can send pics if needed. Email with response: 93fiveo@micro-link.net I dont get to check the boards much.

Aaron

 

I Have An Elbow W/ No Sensor Slightly Cracked Under The Clamp At T.b. Works Perfect, Just Took It Off The Car $30.00 Shipped

 

I have a stock elbow with a functioning IAT, but mine is missing the silencer tube. 25 shipped if you want it. No tears, good overall condition.

 

I've never actually held a stock one in my hand. What exactly is the silencer tube? Is it visble on this picture?
http://www.slponline.com/view_produc...47&BIG=25147-1
If so, what piece is it.

My goal in buying this is to pull a tiny amount of hp out of my car that I can swap back and forth when I pull my restrictor plate. The 1LE elbow that I have gives about 3rwhp.

 

No that is not it. The tube goes into the hole that is in the bottom of the elbow. I have been told you can use a pert plus shampoo bottle to fill in the hole if you dont have it. let me know.

 

Yes, I know that this is not the stock elbow, but I don't have access to a picture of a stock one.

Does the silencer/flow affect hp? I know it sounds retarded for a race car, but I am looking to pull a little hp out of the car. I am too close to the hp limit for my race series and I want to increase my safety margin.

Also, does the elbow have the optispark vent tube hole in it? It should be a small hole on the top of the elbow that a small black hose with a blue end plugs into from the opti.

 

I have one with the silencing tube. Send me your email and I'll send some pics

 

OK. There is a guy here at work with a stock LT1 in the parking lot. Next "smoke break" I'm gonna go out and have a look. I'll get back to both of you guys...

BTW Huntr1117, I assume the IAT works and you have the opti vent hole?

 

The IAT was working when I took it off the car. Bought a trickflow elbow that had a IAT already in it. It also has the vented opti hole.

 

Huntr1117 and I have agreed on a price and have closed the deal.

Thanks to all that responded.