I'm looking for a pair of aluminum LT1 heads in good condition, i.e. not in need of a rebuild. I would also be interested in a complete LT1 intake setup. Please send replies to strianse@yahoo.com

 

i have an intake with egr, 24lb injectors....not included is the fuel rails and the sensors

$100 shipped

 

I have a set of mildly ported heads with stock valves and 3 angle valve job. No springs on the heads. They have around 300 miles on them. Let me know if you are interested. Thanks.
Ryan

 

What kind of porting was done? Was the head cut at all?

 

bowl and runner work. the heads weren't cut. i dont have flow numbers but i do have the dyno numbers with these heads and hot cam kit. if you have somewhere to recieve faxes i can fax you a copy of it. or i can probably scan it and email it to you. let me know.

 

I have a set off a 97.Complete,unmolested,car ran excellent w/60K miles.With or without CC987 springs and Ti retainers.Springs have 1K miles on them...make an offer.

 

i also have a set off my 95 that are perfect, 71,000, no smoke, good springs, not overheated

 

I have a set of stock 1995 heads and intake - $250 plus shipping for both (or $200 plus shipping for the heads and $70 plus shipping for the bare intake). Heads are bare except for the valves. I have stock valve train parts if you're interested in going that route as well.

 

Seller backed out, I'm still looking for the heads. I would like a complete set for $200 shipped; I would travel within 150 miles of north Jersey to pick up.