Looking to buy used LT1 cam. Need something relatively mild that will absolutely pass emissions (zz4, Comp 304, etc.). Let me know what you have and how much. Would prefer cam for vented opti, since I will be changing over to a vented setup.

Also looking to see what's available for used single cat LT1 headers. Would prefer MAC but willing to look into any brand. No long tubes please.

email me at sfphillips1@msn.com

I am working between 60 and 70 hours a week, so I may not get back you 'til later in the evening.

 

I have MAC coated with y-pipe headers with less then 3000 miles on em.

A Comp Cams XE Cam 114LSA 218/230 (great for blowers and nitrous) nearly new, has birth certificate and original box, looking $200

GMPP 1.6rr also nearly new. looking $175

Comp Cams Type R lifters, same. looking $175

Cmotorsports pushrods, springs (good for .600lift) pushrods for $10, springs for $85

Corsa catback, nice 3.5" tips, very clean, nearly new. $550

I also have an lt1 scanmaster with the POS connector on it, a full cluster bezel for it pre-cut (see T/A install method) and it comes with the cleaned out vent thing to mount it that way if you want as well $200

That'd be a start... Basically I modded the daylights out of an lt1 with 140,000 on it, and though it ran like a bat out of hell, the bottom end couldnt handle the power the top end was making and ground out the bearings on rod #2 after 1000 miles...
Anything suit your fancy?

 

Geof, i replied to your post concerning the headers.

 

I also have MAC single cat coated headers for sale with y-pipe, curious as to how much you'd want to pay though?

 

May have a line on a cam, but if you have a small cam, email me, maybe we can work something out. Still looking for a set of MAC shorties (SLP's or AS&M's if the price is right). Unless I get a really good deal on hooker shorties or edelbrocks I'm probably not interested, since I've read too many conflicting opinions on these headers. Also, please let me know who coated the headers (if they are coated).

 

MAC coated headers (coated by MAC themselves) with y-pipe (Also coated).

Also includes:
High flow cat ($150 one that will pass even CA sniffers)
3 flanges (2 are the ones that connect y-pipe to cat, other connects cat to cat-back) You could also make a offroad pipe as well instead of a high flow cat. Your call.

All with less then 3000 miles. All for $400+shipping (I'm negotiable, because money talks!)

 

Found a good deal on a CC305

Still looking for 1-3/4" headers for a single cat, or mac's, provided the asking price is not near brand new.

 

Used edelbrocks. single cat car.. comes with a y pipe.
THey are boxed and ready to go if you are.
275 pls shipping. obo
STEW