WTB- Hard CM pushrods & 7/16 NSA rocker set up & lifters
Thread Starter
Registered User
Joined: Nov 2005
Posts: 124
From: Greensboro , NC
WTB- Hard CM pushrods & 7/16 NSA rocker set up & lifters
Want to buy NSA 7/16 rocker arm setup, hardended pushrods, or lifters.
This is for a head cam swap. Need stuff that is fairly newish or not much wear. ALso looking for new head bolts. All for item for LT1
This is for a head cam swap. Need stuff that is fairly newish or not much wear. ALso looking for new head bolts. All for item for LT1
Registered User
Joined: Oct 2002
Posts: 748
From: P-cola Fl
Re: WTB- Hard CM pushrods & 7/16 NSA rocker set up & lifters
I have a set of 7940's, stock length also. I am going to a different length for the machine work planned. If the other guy falls through, LMK. These were set in the motor but never ran.
Thread Starter
Registered User
Joined: Nov 2005
Posts: 124
From: Greensboro , NC
Re: WTB- Hard CM pushrods & 7/16 NSA rocker set up & lifters
Originally Posted by 91LT16SpdFormy
Ive got it all.All Comp cams. Comp R's,Pro magnum 1.6 rockers and Pushrods part #7940.Let me know if you still need em.All brand new never used.
Thread Starter
Registered User
Joined: Nov 2005
Posts: 124
From: Greensboro , NC
Re: WTB- Hard CM pushrods & 7/16 NSA rocker set up & lifters
Originally Posted by SWINGRRR
I have a set of 7940's, stock length also. I am going to a different length for the machine work planned. If the other guy falls through, LMK. These were set in the motor but never ran.
Thread
Thread Starter
Forum
Replies
Last Post
armedtrigger
LT1 Based Engine Tech
10
Feb 24, 2015 08:30 PM