Need a set of LT1 heads that have been worked but are in good shape. If they have valves, springs, bare or complete, let's negotiate.

Need a set that flow well since I am looking for a setup to rev above 6500 RPM.

Stock, aftermarket, let's talk.

Ben

 

i have a set of bone stock lt1 heads off a 96 formula

pm me if interested

thanks
robbie

 

I have a set of ported 374 casting heads with Manley 202/160 valves and Manley Nextek springs good to .600 lift. The springs have titanium retainers. The heads were ported by Dragon Race Engineering in Colorado. They made 348rwhp on a 355 with a ZZ4 cam in it. PM for more info. Bill

 

Here's what I got.

AFR 190 Heads - $1650 (shipped, ground, continental U.S.) Used set of AFR 190's w/ 56cc chamber. Brand new Manley Severe Duty Pro Flow valves on both the intake and exhaust. Intake valve p/n is 11828 & 2.055". Exhaust valve p/n is 11827 and is 1.600". Brand new comp springs, p/n 978-16, installed height of 1.850", 130 lbs of seat pressure at 1.850", 355 lbs of open spring pressure at 1.260", coil bind height of 1.195". New titanium retainers w/ ten degree locks. Fresh valve job. Heads have 20 minutes of dyno time since all the above parts were installed.

Thanks,



Steve.