Exhaust Manifold bolts
cats to manifold nuts
y-pipe to cats nuts
and y-pipe to intermediate pipe nuts

EMAIL TO WS602ZIPPER@AOL.COM

 

ttt

 

I got it all, or the whole exhaust, let me know what you wanted to pay. (I realy have never thought about what I would sell my nuts for) So give me a price. I also got o2 sensors off a 99ls1 with 28k on it if interested.

Thanks
Eric

 

I need all for the hardware parts of the exhaust and the 02's. I will also need the stock bellow w/ clamps. Let me know how much you are looking to get these items. If you have a low milage STOCK MAF out of an 02 LS1 let know know too. I have an 02 WS6

Richard

 

Just to make sure the exhaust is the same, I have dual cats with the flatten pipe on the driver's side going into y pipe. You need the three nuts on each side bolting it to the manifold? The bolts between the driver's side cat and the y-pipe on the back side of the cat are being sold with the y-pipe and cat. Do you need the clamp after the y-pipe, and do you need all the hangers?

I will sell all 4 of the O2 Sensors for $50 and all of the hardware that I see besides for the ones with the y-pipe. Let me know on the hangers. I'll throw them in, but you pay shipping, and if you don't need them why pay for shipping?

I have the stock bellow, but the motor is a '99 so I don't think the MAF will work for you. How about an extra $5 for the bellow?

Let me know exactly what you need and where in Downey to ship them.

Thanks,
Eric

 

Sent you mail.

Richard