In need of a LT1 shortblock
Thread Starter
Registered User
Joined: Jan 2003
Posts: 1,362
In need of a LT1 shortblock
Just need a shortblock, need it to be able to fit whatever 95's had on them as far as opti and heads if they are different. Looking for low milage or freshly rebuilt. Im locating in Texas and will drive up to 4 hours to pick it up. I just want to drive my car again....
Registered User
Joined: Jan 2002
Posts: 1,743
From: Mission, Kansas
Re: In need of a LT1 shortblock
I got a 383 shortblock.
Eagle Forged LT1/SBC Crankshaft 3.75" Stroke
Eagle SIR connecting rods
Aries Forged Pistons(made for nitrous)
11:1 compression
It has about 1100 miles on it
Internally balanced
Built by Burlington, the waterpump locked up on and caused the timing chain to break. Burlington went back through the motor after the chain broke. You can see on the pistons where the valve contacted it but it didn't hurt it and Burlington said their was no need to change out pistons. I even asked if I payed to change the pistons, and he would recommend just keeping the ones in there because they are fine.
I want $2,000 for the shortblock, and I'm selling it so I can buy a house.
Eagle Forged LT1/SBC Crankshaft 3.75" Stroke
Eagle SIR connecting rods
Aries Forged Pistons(made for nitrous)
11:1 compression
It has about 1100 miles on it
Internally balanced
Built by Burlington, the waterpump locked up on and caused the timing chain to break. Burlington went back through the motor after the chain broke. You can see on the pistons where the valve contacted it but it didn't hurt it and Burlington said their was no need to change out pistons. I even asked if I payed to change the pistons, and he would recommend just keeping the ones in there because they are fine.
I want $2,000 for the shortblock, and I'm selling it so I can buy a house.
Thread
Thread Starter
Forum
Replies
Last Post