waterpump & housing shipped to 63051 doesnt need to work...

email pictures and prices to tofusayg@aol.com

i am building this meizere electric pump conversion for a friend..got the electric pump need the housing..

http://web.camaross.com/forums/showthread.php?t=333043

i am selling a bunch of parts so, i might trade too....

 

i have two housing with pumps installed...dont know if they work or not...one was pulled from a running wrecked car...the other was working but replaced during an opti change...shoot me an offer on either or both
thanks
bubba

 

I have a housing already stripped and sandblasted, ready for paint, powdercoating or polishing. It has the rear drive hole plugged and both ports for the heater core are plugged. I can get pics tomorrow if you are intrested.

I'll trade ya for some fittings if you have them. I need a 4an 90* swivel and a short 2 ft hose. preferably with an 1/8" NPT end on the other side. I am trying to hook up my fuel pressure sender to the schrader valve. Here are the 2 summit parts I was looking at

http://store.summitracing.com/partde...tt=nos%2D17535

http://store.summitracing.com/partde...os%2D15230%2D2

 

i am pretty sure i have what you need..but couple things first.... i would need pictures for sure..and can the heater core lines be unplugged?

 

send me an email at tofusayg@aol.com...

so i can send you a picture of what i have

 

The heater core lines can not be unplugged at this point. The tubes have been removed and the ports plugged with freeze plugs. Its more for a race car use than a street car. I will get some pics tonight and send them to you. Even if your not intrested in the housing I am still intrested in the fitting and line if you have them. I'll send pics later tonight.

 

i have a complete pump housing if your interested. let me know

 

thanks to all, i have one in transit now...