n2oCamaro

Yank 3200 with 2.2 STR for LT1 4l60E. This was used in my 4L60E until it went out (I am switching to a th400). It will probably need to be cleaned out. 275.00+shipping.

blackcar628

Are you up for trades?
I have:
1 set of LT1 aluminum heads (This engine had a burnt piston so one of the compression chambers is a lil marked up where the metal was flying around, but it will not affect anything)
1 non vented opti, 1 water pump both with under 1000 miles.
I have alot of stuff around my house so if there's anything you need just ask. Im really needing a stall, but the truth is im a college student already in debt so I have to swap as much as I can for parts.

n2oCamaro

I need a 3 speed reverse pattern shifter, nitrous bottle and purge valve. If you have any of these we may be able to work something out. I will give cash offers priority though.

Note-just to clearify, there is nothing wrong with the converter. I say it may need to be cleaned because reverse went out on the trans. while I was running it.

blackcar628

i have 2 old school nitrous bottles, I have nitrous in my car but Im not really interested in breaking my system up. The bottles I have prolly would not suit you. so anyway, good luck selling the converter I'll just have to pinch my pennies.

Zigroid

Im interested... how did this work with your setup? Is it a lockup converter?

Im going with a 383 with LE3 heads & cam which is pretty similar.

n2oCamaro

Worked great with my set-up. Good street manners and when I got into the throttle it unleased hell .Yes it is a lock up.

LiT1_up

Is it 9.5"?

Fat_Boy

I PM'd ya...

n2oCamaro

Sale pending

95WhiteTA

i got dibs if the pending sale falls through