XE270, heads, misc.
Thread Starter
Registered User
Joined: Dec 2003
Posts: 48
From: Topeka
XE270, heads, misc.
X-treme (oem) Hydraulic roller cam Grind # XR270HR-10 specs 218/224 duration @ .05" Adv. 270/276 @ .006 .495/503" lift on 110 LSA. Same cam as a xe269 but on 110 LSA. I'll include the cam card with it. The cam ran fine on my untuned L98 and has a noticeable lope. I went with a little bigger cam to accent my combination, around 6k miles on it, $175 OBO+shipping
Stock L98 (iron) heads
Again just under 6k miles on new seals, valve job and they were milled for straightness. Have Crane 99846 H-11 Springs installed (these are $125 new!) with stock retainers and locks. Also have the stock self aligning rockers, centerbolt covers with good gaskets and pushrods. I went to aftermarket heads. I'd like $250 as a set $200 with stock springs or I'll sell parts seperately.
3973487 heads. I picked them up for porting practice, but these could be a decent head to build up. $50 for the pair?+ship
I also have a pair of smog small valved 305 heads. These were on a running car about a year ago. I'm planning on practicing my porting with these, but if somebody would want them let me know. free?
Corvette TPI runners(cast look) and plenum. Make offer, I may polish these up if I can find a interested buyer.
TPI (f-body) fuel rail and lines with DIY adjustable AFPR. I'd probably sell the AFPR alone too, make offer.
95+ 4.3l S10 Torque converter. Stalls around 2,300 rpm. Great mild converter. I went with a 3500 stall midwestern, so its off a running transmission. Paid $160 for it, $75? OBO+ship
Some other stuff that’s cluttering up my garage:
L98 Exhaust manifolds and y-pipe best flowing third-gen manifolds, best offer $20? +ship or free pickup.
1988 L98 cam 207/213 dur. 117 LSA 415/430 lift, $25 OBO+ship
28 spline 10 bolt axles, for a thirdgen. A cheap way to install a SLP take-off posi in an open rear end. $50? OBO+shipping
New 2.5" Percy's dead soft aluminum collector gaskets $16 new from jegs, $8 shipped?
Iron drums, off the same car as the axles $20? OBO+ship
I accept paypal, MO or I can ship COD for items over 100. Pic's available on request. I'm also open to trades, let me know what you have. My cell phone is 785-640-9846 and my home phone is 785-478-3925 or email me at roostmeyer@hotmail.com or my AOL IM id is roostmeyer as well. Make an offer, I can't be insulted
Stock L98 (iron) heads
Again just under 6k miles on new seals, valve job and they were milled for straightness. Have Crane 99846 H-11 Springs installed (these are $125 new!) with stock retainers and locks. Also have the stock self aligning rockers, centerbolt covers with good gaskets and pushrods. I went to aftermarket heads. I'd like $250 as a set $200 with stock springs or I'll sell parts seperately.
3973487 heads. I picked them up for porting practice, but these could be a decent head to build up. $50 for the pair?+ship
I also have a pair of smog small valved 305 heads. These were on a running car about a year ago. I'm planning on practicing my porting with these, but if somebody would want them let me know. free?
Corvette TPI runners(cast look) and plenum. Make offer, I may polish these up if I can find a interested buyer.
TPI (f-body) fuel rail and lines with DIY adjustable AFPR. I'd probably sell the AFPR alone too, make offer.
95+ 4.3l S10 Torque converter. Stalls around 2,300 rpm. Great mild converter. I went with a 3500 stall midwestern, so its off a running transmission. Paid $160 for it, $75? OBO+ship
Some other stuff that’s cluttering up my garage:
L98 Exhaust manifolds and y-pipe best flowing third-gen manifolds, best offer $20? +ship or free pickup.
1988 L98 cam 207/213 dur. 117 LSA 415/430 lift, $25 OBO+ship
28 spline 10 bolt axles, for a thirdgen. A cheap way to install a SLP take-off posi in an open rear end. $50? OBO+shipping
New 2.5" Percy's dead soft aluminum collector gaskets $16 new from jegs, $8 shipped?
Iron drums, off the same car as the axles $20? OBO+ship
I accept paypal, MO or I can ship COD for items over 100. Pic's available on request. I'm also open to trades, let me know what you have. My cell phone is 785-640-9846 and my home phone is 785-478-3925 or email me at roostmeyer@hotmail.com or my AOL IM id is roostmeyer as well. Make an offer, I can't be insulted
Thread
Thread Starter
Forum
Replies
Last Post
Victor Lamb
Suspension, Chassis, and Brakes
3
Aug 26, 2017 02:52 PM
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
NewsBot
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
0
Jan 29, 2015 07:10 PM
NewsBot
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
0
Dec 28, 2014 06:20 PM