True Dual exhaust for sale.....
Thread Starter
Registered User
Joined: Sep 2003
Posts: 1,726
From: Charlotte, NC
True Dual exhaust for sale.....
I am selling this setup because I am going with an IRS setup.
Made for longtube headers. System is 3" stainless w/an x-pipe and then into some race bullet mufflers. After the mufflers, it is reduced to 2.5" aluminum piping. It goes under the axle and out the back into 2.5" inlet hooker dual dual tips (chrome). With the stock torque arm, I am having interference issues with the driver's side piping. If you have an aftermarket torque arm, you will not have this problem. Thats pretty much it. The driver's side bullet muffler has been dragging quite a bit and is scrubbed own quite a bit. Looks like it will need to be replaced.
This exhaust, like I said, has clearance problems because of the stock torque arm. Other than that, a torch should solve any other issues. I could just sell it from the headers back to before the axle and you could cut the rest of the piping off and put turndows on it. I didn't experience clearence problems that way.
I will sell for $200 if you just buy from the headers back to the mufflers or I will sell for $400 for the complete setup. I think that is a fairly good deal. The best deal I can find around here just for the service of making one of these systems is $450. And i would have to supply mufflers, cats, and tips. So, we're looking at a full dual exhaust setup thats already assembled and all you have to do is bolt it up. It bolts to the headers, has bolt-in hangers that you put up before the axle, and hangers for each tip after the axle. Serious buyers only please.
Made for longtube headers. System is 3" stainless w/an x-pipe and then into some race bullet mufflers. After the mufflers, it is reduced to 2.5" aluminum piping. It goes under the axle and out the back into 2.5" inlet hooker dual dual tips (chrome). With the stock torque arm, I am having interference issues with the driver's side piping. If you have an aftermarket torque arm, you will not have this problem. Thats pretty much it. The driver's side bullet muffler has been dragging quite a bit and is scrubbed own quite a bit. Looks like it will need to be replaced.
This exhaust, like I said, has clearance problems because of the stock torque arm. Other than that, a torch should solve any other issues. I could just sell it from the headers back to before the axle and you could cut the rest of the piping off and put turndows on it. I didn't experience clearence problems that way.
I will sell for $200 if you just buy from the headers back to the mufflers or I will sell for $400 for the complete setup. I think that is a fairly good deal. The best deal I can find around here just for the service of making one of these systems is $450. And i would have to supply mufflers, cats, and tips. So, we're looking at a full dual exhaust setup thats already assembled and all you have to do is bolt it up. It bolts to the headers, has bolt-in hangers that you put up before the axle, and hangers for each tip after the axle. Serious buyers only please.
Registered User
Joined: Nov 2005
Posts: 51
Re: True Dual exhaust for sale.....
could you send me some pics to tiffybear01@yahoo.com .how would you ship it? i'm in jacksonville,nc.
Registered User
Joined: Apr 2005
Posts: 59
Re: True Dual exhaust for sale.....
send me pics to very interested lasness@gmail.com also that includes shipping right
Registered User
Joined: Oct 2004
Posts: 1,336
Thread
Thread Starter
Forum
Replies
Last Post
guionM
Automotive News / Industry / Future Vehicle Discussion
9
Aug 29, 2002 01:48 PM