Shortblock 355 Fresh, 385 forged rotating, Built 4L60E
01-26-2012, 06:51 PM
#1
Registered User
Thread Starter
Join Date: Dec 2002
Location: Gretna, NE
Posts: 1,695
Shortblock 355 Fresh, 385 forged rotating, Built 4L60E
I have up for sale a 355 LT1 with forged pistons and rods. This was professionally assembled and has never been fired (heads have been bolted on to mock up the assembly but the motor has never been installed or started). Motor is in perfect condition and includes a factory turned/polished crank, forged SCAT I beam rods, and Forged TRW -5cc flattop pistons (part number is pictured in one of the pics below). Perfect replacement for a blown engine or a great performance upgrade for someone wanting to spray.
SOLD Here are some pictures -
I have a built 94 4L60E that was put together by Combination Motorsports when they were still in business. Was behind a 396 LT1 for about 10k street miles and did very well. Firm shifts and very reliable. was over $1300 new. $750 plus shipping. This will only work with 94 LT1 Cars.
385 rotating assembly SOLD
SOLD Here are some pictures -
I have a built 94 4L60E that was put together by Combination Motorsports when they were still in business. Was behind a 396 LT1 for about 10k street miles and did very well. Firm shifts and very reliable. was over $1300 new. $750 plus shipping. This will only work with 94 LT1 Cars.
385 rotating assembly SOLD
Last edited by ddr698; 02-13-2012 at 03:49 PM.
01-26-2012, 07:53 PM
#2
Registered User
Join Date: Jun 2000
Location: Washington, Michigan USA
Posts: 857
Re: Shortblock 355 Fresh, 385 forged rotating, Built 4L60E
Also for sale a balanced and forged rotating assembly for an LT1 to make a 385 CID. Everything is in excellent condition. Pulled out of the block due to it freezing and cracking externally (no damage to internals just the block is unusable). Rotating assembly still in great condition.
Eagle 4340 forged 3.75" crank for 5.7" rods
Scat 4340 forged 5.7" rods, i beam
Probe Forged flat top (-5cc valve reliefs) aluminum pistons 4.040"
All of these parts are internally balanced to work together. You just need a fresh block to drop them into. There is over $1500 worth of parts/balancing here when new.
$750 plus shipping
01-26-2012, 08:38 PM
#3
Registered User
Join Date: Dec 2008
Location: ABQ, NM
Posts: 437
Re: Shortblock 355 Fresh, 385 forged rotating, Built 4L60E
I knew I should have hit u up before trying to piece my 385 together. Hell ill have double invested in it than what u are selling that one for. ill start pming u first before buying more parts for the build 
01-29-2012, 03:43 PM
#6
Registered User
Join Date: Jun 2000
Location: Washington, Michigan USA
Posts: 857
Re: Shortblock 355 Fresh, 385 forged rotating, Built 4L60E
Doug, thanks for the additional info on the rotating assembly, but consider me "out" on it.
I can bump this up to the top for you though! Good Luck with your sale.
I can bump this up to the top for you though!
Good Luck with your sale.
01-30-2012, 07:06 PM
#7
Registered User
Thread Starter
Join Date: Dec 2002
Location: Gretna, NE
Posts: 1,695
Re: Shortblock 355 Fresh, 385 forged rotating, Built 4L60E
From what im told 94 doesn't have PWM control and 95 does. It would work it just requires a computer reprogram with 94 transmission parameters to work in the 95.
Last edited by ddr698; 01-31-2012 at 10:55 PM.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
10-31-2016 11:09 AM
SpraydZ
Parts For Sale
42
06-07-2016 01:44 PM
87Aerocoupe
Forced Induction
6
03-20-2015 01:23 AM
