SBC 357" Hypereutectic Shortblock, Moroso Oil Pan 3rd Gen, 700R4 Trans
Thread Starter
Registered User
Joined: Sep 2000
Posts: 550
From: KC; Where grandma drives in the left lane
For sale SBC 357" Hypereutectic Shortblock, Comp R lifters, "236/242" Comp Cam
Changing directions so this is for sale again.
357” Shortblock. Stock block bored .040” stock crank I believe is .010/.010. Stock rods sized with arp bolts rotating assembly is balanced. Comes with balancer and flexplate for 700R4. Clevite Bearings and Keith Black flat top hyper pistons with two valve reliefs. Runs great, has great oil pressure. It's at the machine shop right now being freshened and will have 0 time when I sell it. This shortblock was new under 50 miles ago. Selling cam and lifters seperately. $400
Also listing the cam and lifters from this setup. The cam has a few miles on it and the lifters have even less. These are the Comp R series for SBC or LT1. I'll take $125 shipped for the lifters and $150 for the cam?
If any of these prices seem high I'll look around and see what others are selling similar parts for.
Email questions to mgm@everestkc.net
357” Shortblock. Stock block bored .040” stock crank I believe is .010/.010. Stock rods sized with arp bolts rotating assembly is balanced. Comes with balancer and flexplate for 700R4. Clevite Bearings and Keith Black flat top hyper pistons with two valve reliefs. Runs great, has great oil pressure. It's at the machine shop right now being freshened and will have 0 time when I sell it. This shortblock was new under 50 miles ago. Selling cam and lifters seperately. $400
Also listing the cam and lifters from this setup. The cam has a few miles on it and the lifters have even less. These are the Comp R series for SBC or LT1. I'll take $125 shipped for the lifters and $150 for the cam?
If any of these prices seem high I'll look around and see what others are selling similar parts for.
Email questions to mgm@everestkc.net
Last edited by nosfed; Jan 30, 2005 at 09:37 PM.
Thread Starter
Registered User
Joined: Sep 2000
Posts: 550
From: KC; Where grandma drives in the left lane
Re: SBC 357" Hypereutectic Shortblock, Moroso Oil Pan 3rd Gen, 700R4 Trans
Cam is XR 288HR part number 08-433-8
Has 288/294 adv dur, 236/242@.050 and .520/.540 lift with 1.5 rockers 110lsa.
Has 288/294 adv dur, 236/242@.050 and .520/.540 lift with 1.5 rockers 110lsa.
Thread
Thread Starter
Forum
Replies
Last Post
stockssn2o
Parts For Sale
14
May 25, 2015 08:54 AM