FOR SALE:1 BAD LT1(Stroked)
Thread Starter
Registered User
Joined: Jul 2003
Posts: 40
FOR SALE:1 BAD LT1(Stroked)
Ok Guys here is what is in it and how much it cost.
1.Comp Pro Mag. Rockers-280.00
2.Comp Solid Lifters-315.99
3.Laser Custom Grind Solid Roller Cam Shaft-330.00
4.Crane Valve Springs for Solid Roller-291.95
5.Screw In Rocker Studs 7/16-28.95
6.Arp Head Studs-145.95
7.Double Roller Timing Chain-75.00
8.Heavy Duty Alluminum Valve Covers With Stud Girdle-400.00
9.Cola 383 Crank (4340) -800.00
10.Miloden Splayed Main Caps-215.00
11.Eagle H-Beam Rods-495.95
12.JE Forged Flat Top Pistons-580.39
13.JE File to Fit Rings-96.99
14.Copper Head Gaskets .060-100.00
15.High Volume oil pump-40.00
16.Oil Pickup tube-10.00
17.Tri Metel Bearings(Clevite)-120.00
18.Cam Bearings-32.00
19.Brass Freeze Plugs-12.00
20.Felpro Lower Half Gaskets-75.00
21.Felpro Upper Half Gaskets-149.00
22.Fully ported and polished heads-1,600.00
Machine shop labor
1.Assembly-350.00
2.Splayed Caps-150.00
3.Ole Ring Block-150.00
4.Clearence Block-100.00
5.Balance & Blue Print-225.00
6.Line Bore-150.00
7.Install Freeze Plugs-10.00
8.Install Cam Bearings-20.00
9.Fit Pins-32.00
10.Re bore Block-175.00
11.Recondition Rods-113.00
12.Clean Motor Parts-65.00
13.Assemble Pistons-16.00
This Motor is A solid Roller 383.It is ole ringed and set up for a 400 shot of nitrous.I was expecting 9s out of my set up.
I am selling it for 7,800.00 No exchange or core.If you are thinking of building a motor this is a bad boy.You will not have the down time of building a motor.This Motor is brand New.It is still on the Engine Stand.You can email me or call me at 254-495-0261.This motor has to be purchased with CASH or MONEY ORDER.No checks or credit cards.
Thanks
Dave
1.Comp Pro Mag. Rockers-280.00
2.Comp Solid Lifters-315.99
3.Laser Custom Grind Solid Roller Cam Shaft-330.00
4.Crane Valve Springs for Solid Roller-291.95
5.Screw In Rocker Studs 7/16-28.95
6.Arp Head Studs-145.95
7.Double Roller Timing Chain-75.00
8.Heavy Duty Alluminum Valve Covers With Stud Girdle-400.00
9.Cola 383 Crank (4340) -800.00
10.Miloden Splayed Main Caps-215.00
11.Eagle H-Beam Rods-495.95
12.JE Forged Flat Top Pistons-580.39
13.JE File to Fit Rings-96.99
14.Copper Head Gaskets .060-100.00
15.High Volume oil pump-40.00
16.Oil Pickup tube-10.00
17.Tri Metel Bearings(Clevite)-120.00
18.Cam Bearings-32.00
19.Brass Freeze Plugs-12.00
20.Felpro Lower Half Gaskets-75.00
21.Felpro Upper Half Gaskets-149.00
22.Fully ported and polished heads-1,600.00
Machine shop labor
1.Assembly-350.00
2.Splayed Caps-150.00
3.Ole Ring Block-150.00
4.Clearence Block-100.00
5.Balance & Blue Print-225.00
6.Line Bore-150.00
7.Install Freeze Plugs-10.00
8.Install Cam Bearings-20.00
9.Fit Pins-32.00
10.Re bore Block-175.00
11.Recondition Rods-113.00
12.Clean Motor Parts-65.00
13.Assemble Pistons-16.00
This Motor is A solid Roller 383.It is ole ringed and set up for a 400 shot of nitrous.I was expecting 9s out of my set up.
I am selling it for 7,800.00 No exchange or core.If you are thinking of building a motor this is a bad boy.You will not have the down time of building a motor.This Motor is brand New.It is still on the Engine Stand.You can email me or call me at 254-495-0261.This motor has to be purchased with CASH or MONEY ORDER.No checks or credit cards.
Thanks
Dave
Thread Starter
Registered User
Joined: Jul 2003
Posts: 40
The heads are MTI heads.LT1 I sent them to Craig at GTP anfd Brodix and had them checked out before using.I have the flow sheets.They flow well.The cam is a custome grid if some one is serios about the set up ill get them the specs I dont ahve them on me right now.The motor is 12.1 compression.I droped it from 13.1 to 12.1 with a thicker head gasket.
Thread
Thread Starter
Forum
Replies
Last Post
F'n1996Z28SS
Cars For Sale
8
Aug 23, 2023 11:19 PM
95z_28_camaro_4_Ivan
General 1967-2002 F-Body Tech
2
Dec 19, 2014 08:48 PM
