Custom T88 Header Kit (capable of 1000hp) - $1000 shipped

This is a great deal. I want this out of my garage this week!!!

How To Install Intercooler + Pics
https://www.camaroz28.com/forums/sho...light=lt1boost

Mild Steel Hotparts Setup for a PT88 T4 turbo (turbo not included)

Intercooler + intercooler piping ready to bolt up to car.

Custom made 1 5/8" headers with 2.5" Vband flanges

2.5" crossover/merge pipe

3" Downpipe that runs to the bellhousing

4" Downpipe (race dump pipe) that exits down to the ground in front of the k-member

includes 44mm Wastegate with 20psi spring (you will have to buy lower springs to run lower boost)

Thermo Tec graphite black exhaust wrap already installed ($200 worth of wrap)

Comes with an instruction manual for installation


Requirements for installation:

1. You will have to stand the radiator up vertical.

2. You will need slimmer electric fans

3. You will need to rotate the oil cooler tube up on the water pump... so you will most likely need to delete your oil cooler if you have one on your car.

4. You will have to delete your A/C, smog pump (A.I.R. injection pump) and block off the EGR ports on the back of the intake.

5. You may need to grind/modify a portion of the ABS block in order to clear the driver's side header.

Please PM with an offer.

Pictures:















How To Install Intercooler + Pics
https://www.camaroz28.com/forums/sho...light=lt1boost

 

looks like a good deal, who built the kit?

 

This was built by lt1boost.net. Please email me @ gamer2343@yahoo.com if you are interested.

 

Bump...

 

That is an oldy... but goody! I built that years ago, so the welds may not be the prettiest, but it will support gobbs of power (800+ rwhp).

 

Thanks for the comment realquick. Yes, it has been sitting in the garage a while. Never put it on.

 

any1 know if these will fit a 96 impala ss

 

I know this is a longshot but do you still have this??