Ported LT1 Heads/Cam/Intake package FS!! CHEAP!!
#1
Ported LT1 Heads/Cam/Intake package FS!! CHEAP!!
You want a powerful street machine but you don't want to spend a fortune? Well you've come to the right place!!
I am finally getting around to parting out my old 383 LT1 setup and I am looking to sell my heads/cam/intake package in one swoop. I have not removed the heads/intake or cam yet but I will do so promptly when someone makes a reasonable offer and decides to buy the setup. Here is what I have
LT1 Heads, Professionally Ported and Polished, I don't have a flow sheet anymore but they flowed in the 260 range, stock size valves with a 3 angle valve job, Isky racing springs, retainers and locks.
Port matched LT1 Intake manifold
LPE Camshaft, 219/219 duration 533/560" lift.
Everything has less than 2K miles. I have some money in this setup and I am looking to get $1000.00 for everything but I will entertain reasonable offers. This setup is guaranteed to make more power than a hotcam setup for a fraction of the price and the torque is ungodly!!
Also I have a set of Forged Speed Pro Nitrous Slugs (4.030 bore, 3.75 stroke, 5.7" rod) that I had in the motor with this head/cam package that produced around 11.2:1 compression and made a boat load of power so let me know if you are interested in these to go along with the heads/cam package and we can negotiate a price.
P.S. I still have a set of Accel 36lb injectors, and Hooker Super Comp Long Tube Headers 1 3/4" for sale!!
Heres your chance to rule the streets without breaking the bank!!
Thanks for looking
-Mike
I am finally getting around to parting out my old 383 LT1 setup and I am looking to sell my heads/cam/intake package in one swoop. I have not removed the heads/intake or cam yet but I will do so promptly when someone makes a reasonable offer and decides to buy the setup. Here is what I have
LT1 Heads, Professionally Ported and Polished, I don't have a flow sheet anymore but they flowed in the 260 range, stock size valves with a 3 angle valve job, Isky racing springs, retainers and locks.
Port matched LT1 Intake manifold
LPE Camshaft, 219/219 duration 533/560" lift.
Everything has less than 2K miles. I have some money in this setup and I am looking to get $1000.00 for everything but I will entertain reasonable offers. This setup is guaranteed to make more power than a hotcam setup for a fraction of the price and the torque is ungodly!!
Also I have a set of Forged Speed Pro Nitrous Slugs (4.030 bore, 3.75 stroke, 5.7" rod) that I had in the motor with this head/cam package that produced around 11.2:1 compression and made a boat load of power so let me know if you are interested in these to go along with the heads/cam package and we can negotiate a price.
P.S. I still have a set of Accel 36lb injectors, and Hooker Super Comp Long Tube Headers 1 3/4" for sale!!
Heres your chance to rule the streets without breaking the bank!!
Thanks for looking
-Mike
#2
ill take the long tubes if they are coated and dont have egr/air, email me glocklimited9@aol.com
#4
location? trade plus cash for stock heads, cam, intake with 5k miles on the
pics?
white96lt1@yahoo.com
pics?
white96lt1@yahoo.com
#11
I wouldn't be able to get a shipping quote until I take the parts off the motor and weigh them etc. but I know I don't want to take less than $1000.00 for the set up as I have a good deal more into it than that. Yes I do take paypal. If you are interested please pm me or send me an email at m.sbandi4321@yahoo.com, Thanks
-Mike
-Mike
#12
I wouldn't be able to get a shipping quote until I take the parts off the motor and weigh them etc. but I know I don't want to take less than $1000.00 for the set up as I have a good deal more into it than that. Yes I do take paypal. If you are interested please pm me or send me an email at m.sbandi4321@yahoo.com, Thanks
-Mike
-Mike
Thread
Thread Starter
Forum
Replies
Last Post
F'n1996Z28SS
Cars For Sale
8
08-23-2023 11:19 PM
oldschool
Parts For Sale
16
02-09-2016 09:21 PM