Ported LT1 Heads/Cam/Intake package FS!! CHEAP!!
 

You want a powerful street machine but you don't want to spend a fortune? Well you've come to the right place!!

I am finally getting around to parting out my old 383 LT1 setup and I am looking to sell my heads/cam/intake package in one swoop. I have not removed the heads/intake or cam yet but I will do so promptly when someone makes a reasonable offer and decides to buy the setup. Here is what I have

LT1 Heads, Professionally Ported and Polished, I don't have a flow sheet anymore but they flowed in the 260 range, stock size valves with a 3 angle valve job, Isky racing springs, retainers and locks.
Port matched LT1 Intake manifold
LPE Camshaft, 219/219 duration 533/560" lift.

Everything has less than 2K miles. I have some money in this setup and I am looking to get $1000.00 for everything but I will entertain reasonable offers. This setup is guaranteed to make more power than a hotcam setup for a fraction of the price and the torque is ungodly!!

Also I have a set of Forged Speed Pro Nitrous Slugs (4.030 bore, 3.75 stroke, 5.7" rod) that I had in the motor with this head/cam package that produced around 11.2:1 compression and made a boat load of power so let me know if you are interested in these to go along with the heads/cam package and we can negotiate a price.

P.S. I still have a set of Accel 36lb injectors, and Hooker Super Comp Long Tube Headers 1 3/4" for sale!!

Heres your chance to rule the streets without breaking the bank!!

Thanks for looking

-Mike

ill take the long tubes if they are coated and dont have egr/air, email me glocklimited9@aol.com

they are not coated, sorry.


-Mike

location? trade plus cash for stock heads, cam, intake with 5k miles on the
pics?
white96lt1@yahoo.com

I am in Winchester, VA. Sorry I cannot trade for stock LT1 goodies, I have spare LT1 stuff out the wazoo, if you are interested in trading something else or want to pay straight up let me know. Thanks

-Mike

How much for the headers shipped to 92705?

would you take 700 for the h/c without the intake? its all i got.. :( pm me if your interested.

I don't know if I am willing to seperate the parts just yet, sorry.

-Mike

i understand. could you pm me your bottom dollar for the h/c/i then, if its cheap enough i can try to scrape together a few hundred more and take it off your hands.

How much for the H/C/I/Headers Shiped to Tx (78557)? Do you take Paypal?

I wouldn't be able to get a shipping quote until I take the parts off the motor and weigh them etc. but I know I don't want to take less than $1000.00 for the set up as I have a good deal more into it than that. Yes I do take paypal. If you are interested please pm me or send me an email at m.sbandi4321@yahoo.com, Thanks

-Mike

email sent..

headers?
 

Wondering if u still have the headers... if so how much will it take to buy them?

What is the lsa of the cam? and are those lift #'s with the 1.5 or 1.6 RR?

did you sell the heads cam and intake