I have finally sold my house and have to part the car out to clear out the garage and pay some bills. The car was originally B.J. Schraders (Slomaro) and I bought it a few years ago. The car dyno'd for him at 505 rwhp and a little less for me. Then I believe I may have gotten a bad tank of gas but the car stopped running well a couple months ago. First it was thought to be a bad head gasket but I tore the car apart and found what appeared to be crystal like pieces in the engine cylinders. This caused some damage to the pistons and heads. One piston on the passenger side cracked a piece off and one on the driver side has dings on it. These dings also are on the heads. I think that the heads can be decked and polished but atleast one piston, if not two pistons need to be changed. The heads themselves are Stage II ported and polished from GTP and flowed (295 int / 190 exh). I do not have the flow sheets for these heads. Also, first in line for the heads is a guy in Miami named C.J. but after that they are up for grabs. I am able to take pictures of anything if neccessary. I am typing all of this because I do not want anyone to be surprised if they do purchase something from me. While I have included some prices, I will consider any reasonable offer as well. Prices do not include shipping, car is located in Orlando Fl 32825. Please email me at brian.miller2@hartfordlife.com. The car pieces are as follows:

Rolling Chasis:
1996 Black Z28 fully loaded t-top black leather w/ RK Sport wraparound spoiler and blk billet front grill - 76,000 Miles on Odometer
3.73 gears with T/A girdle and stud kit
Autometer Phantom Boost and fuel pressure gauges (A Pillar)
Scan Master II located in A/C vent
GTR Dimpled Brakes
Russell Stainless Steel Brake lines
Pan hard Bar
Hotchkis Rear Suspension
Energy Front Sway Bar Links
$2,000

Short Block 355 c.i. forged 9.53:1 Wiseco pistons, forged Eagle rods (Needs 1 to 2 pistons replaced)
Custom Cam-Cam Motion Cam blower grind (Comes with shortblock)
Brand New Optispark (Installed at Norris Motorsports)
Oil Pan drilled for supercharger line
$800

Stage II ported heads and intake (295 int. / 190 exh) (needs resurfacing) Has springs and pushrod guides for non aligning 1.6 roller rockers
$1,000

Stock Intake

Fuel Rails set for large gas lines

MSD 50# Injectors
$300

58 mm BBK Throttle Body from my old car (Needs a good cleaning - was sitting for 2 years and had water in it when I blew my old waterpump in my old car)

Stock Throttle body

Vortech V-1 S-Trim 10# pulley (Brad Brand Intake Tubes designed for Vortech Aftercooler System / Brackets / MAF)
$2,000

Vortech Aftercooler (needs aftercool top heatshield cover - I ripped it when taking it out) - has new aftercooler pump
$1,000

$2,700 takes entire Supercharger Setup

1.6:1 GMPP Roller Rockers
SOLD

Ed Wright Dyno Tuned Computer for Supercharger setup
$150

Aluminum Driveshaft
$100

Paxton/Aeromotive 1000 hp Fuel System
$300

AS&M 1 ¾ headers - were coated but its wearing off
SOLD

Griffin "Huge" Radiator
Sold

Meziere HD Waterpump
SOLD

 

Price on 58mm Throttle Body,
What kind of condition?
Still work?
Calling dibs on it now

100 Shipped?

Joseph

Skullz6911@Hotmail.com

 

I'll take the RR's...will PM.

...and wp...

 

can you send me pictures and more info on the LT1 griffin radiator?..TransAm6383@aol.com

 

I'm also interested in the radiator.

 

How much for the headers?

 

I'm interested in the water pump and the driveshaft. Also, I'd like to be in line for the heads. Could you send pix of the parts I'm interested in to psycho6@comcast.net?

I might be interested in the fuel system. What are the details of it?

Thanks,


Steve.

 

Another PM sent on TB,
Just send the pics to Skullz6911@Hotmail.com
Whats your paypal address?

Thanks

Joseph

 

Updated

 

What kind of aluminum driveshaft? 1LE, LPE, LS1?

 

what all comes with the fuel system?

 

Pic`s of the A piler Guage pod Please is it dual pod and will it fit a 96 z with t-top`s dibbs if the price is right. Thanks For Your Time. Mike.....................................

 

If no one buys the driveshaft or throttle body I will be flying into Orlando THIS Sunday and can come over to your house, cash in hand and no shipping required.

 

150 for the tb i can pay pal

 

will you send pics of the car to rka.parker@charter.net