Hi, Im parting out my 92 Z28 due to rust issues. I have the following parts For Sale:
LS1 28.8# injectors 65k on them,
stock 94 LT1 cam 80k miles good shape,
GTA TPI intake elbow,
5" Autometer Ultra lite all silver tach with recall and shift light,
2 5/8"(brand new never used) Autometer mech. oil presure gauge silver ring, black face,
2 730ECMs neither are from TPI cars(they have the connectors and about 6 inches of wire sticking out of them for conversions),
Edelbrock TES headers kinda rough no bad rust though CHEAP,
88 TPI throttle body,
88 TPI fuel rails with 24# injectors (i dont know the condition of the injectors)
LT1 ONLY(will not clear TPI runners) Nitrous Works nitrous plate
91-92 aero wing (high rise spoiler)
1LE alumium drive shaft, needs rear U joint, I lost one of the caps moving,
Complete Red Interior from the 92 Z28,
Nice tight 90-92 steering column with wheel, air bag and key,
91-92 GFX minus air dam (it was damaged when the car was wreaked, could be repaired though),
91-92 rear bumper,
85-92 IROC/Z28 tail lights,
9 bolt 3.27 rear end, needs work with modified 10bolt to 9 bolt PBR big brake brakets and calipers,
89 GTA 9 bolt with 3.27s and PBR brakes, good shape,
T5 trans cross member,
complete serpentine belt system from 92 Z28(sale pending),
disk brake perportioning valve,
350TBI intake and t-body,
and other Misc gray and black interior plastic.

I also have other 3rd gen parts that I cant think of off the top of my head. PM me if you are interested or have any other parts you may need that I havent listed. Thanks

Jeremy