I'm parting out my dark green 1997 Trans Am WS6, I’ll take Paypal only. Please reply to the post and me if you'd like to claim something.
All parts are in Austin, Texas, shipping will be extra.

Transmission is already sold.

Engine/exhaust:

I’m trying to sell the complete engine first, i'll part it out later if i have no luck. PM me for more details if you are interested, i have dyno graphs, track times, and receipts: 355 ci (50k miles on it) w/ forged rods/pistons, PCM w/ custom dyno tune, crane 210/224 cam, LE2 heads, 54mm tb(not shown in picture but it's an as&m), 1.6rr, 30# injectors, etc. made 360 rwhp/354 rwtq SAE on a chassis dyno (so somewhere around 410 flywheel hp if you want to compare against crate engines) - $2750.


Stock MAF (w/ screen in place) - SOLD

Arizona Speed and Marine 1&3/4" headers with random tech dual-cat y-pipe, slip fit #1 primary has a gouge through it so it needs to be welded up (i'll do this or you can take $25 off the price and take it as-is) - $325 headers + $225 y-pipe, $550 for the both.

Also have a catless y-pipe for the AS&M headers, $30 shipped





Thunder Racing Billet Aluminum PVC catch can w/ bracket- SOLD

Electronics:

Raptor LED Shift light - SOLD
LT4 knock module - SOLD

MSD ignition coil (almost brand new - swapped in once to help diagnose a problem) - SOLD

JL Audio Power wedge 3 x 10" speaker enclosure with 3 brand new Kicker 07C108 Comp subs - $225


MTX Audio thunder302 amp, 300 watts bridged. Needs a new RCA input jack connectors - $30 shipped



continued in next post...

 

PCM w/ stock programming (this is not the one that comes with the engine, above) - $110 shipped, for a little extra i can tweak the tune for you



Suspension/wheels:

I have a total of 5 Stock WS6 17" rims:
2 are in very good condition - SOLD
3 are in ok condition (curb rash and flaking clear coat), just the rims, no tires - SOLD

LG Motorsports Poly/Rod-end adjustable panhard rod - $100


BMR tubular Poly/Rubber LCAs - SOLD

Stock rubber transmission mount(only used for a few miles) - SOLD
Energy Suspension Poly transmission mount - SOLD

Energy Suspension poly torque arm bushing - $10


continued in next post...

 

Interior:

Complete cloth graphite interior:

Front/Rear seats - $350 for the complete set


Driver and Passenger Door panels - SOLD
Center console(manual) - SOLD

Headliner (perfect condition!) - SOLD

Not pictured items (PM me if you are interested but want to see pics):

Air pump - $30
Air pump with one broken mounting ear - SOLD
power steering pump, new never installed- SOLD
water pump, brand new Duralast, never installed, comes with gaskets - SOLD
window lift motor, new never installed - SOLD
power window motor, barely used - $30 shipped


Prothane poly motor mounts - $40
Gauge cluster - $70
Driver’s side taillight - $50
Taillight center section from a Formula - $25
Power accessory wiring harness (doorlocks/windows/mirrors) - $25
Monsoon 12 disk changer - SOLD
Monsoon speakers (door mids/tweeters and hatch mids/tweeters) - SOLD
Monsoon Amp - $30 shipped
power antenna - SOLD
10" front oxygen sensor extension (flat 4 pin) - SOLD
40" rear oxygen sensor extension(square 4 pin) - $17
ABS control module - SOLD
WS6 springs (front and rear) - $75 shipped
WS6 sway bars (front 32mm, rear 19mm) - SOLD
a/c evaporator - $35 shipped
heater core - SOLD

12 point ARP Stainless 1" header bolts (set of 15)- $18 shipped
spare jack - $30 shipped
anti-theft/impact sensor from hatch - $25 shipped

stock ignition coil - $18 shipped
comp hi-energy hardened pushrods, stock 7.200 length - $25 shipped
throttle cable - $22 shipped

Everything else:
The car itself has significant body damage to the front, but rest of the car is in good shape. Major suspension components like ws6 sway bars and springs are fine. Let me know if there is any random part in particular you want or if you are interested in buying the rest of it, has a salvage title.

 

I'll take the LT4 knock module.

 

Did the foglights make it ok? if so, how much to 97030? Also looking for the headlight harness.

 

Sorry, foglights/headlights didnt make it, i'll double check on the harness tonight but i'm pretty certain its ripped up.

 

1) I would love to take the rear axle bump stops ( they look like this , http://www.fbody.com/tech/details.cgi?id=23 )

and how many miles on the LCAs ?

If you have the bumpstops please email me at cadek1@comcast.net

also some other misc things I could use

2) wiper arm cover - this is the small (6") plastic piece covering wiper arm nut, I need the passenger side one.
3) stock radio plastic power button
4) if you want to separate, then the passenger side power windows/power locks panel panel, I don't need the whole door panel though.
5) cruise control cable that goes to the throttle body

 

I need a bolt and spacer from the exhaust crossover under the middle of the car

 

how much for the rolling shell with the console?? p your number i would like totalk to you

 

got the WS6 badges?

 

Do you have the top part of the dash, the cover. I need one. Thank you

 

Paypal sent for KM.

Thanks.

 

i'm interested in the clutch master reservoir
the vss connector
the reverse lockout connector
the reverse lights sensor and connector

 

intrested in the pcm with wiring harness? are you willing to sell the wiring harness? is the pcm odb1?

 

no, top part of the dash has cracks, sorry.